iBoot/platform/t8010/miu/miu.c

211 lines
5.5 KiB
C
Raw Permalink Normal View History

2023-07-08 13:03:17 -07:00
/*
* Copyright (C) 2012-2014 Apple Inc. All rights reserved.
*
* This document is the property of Apple Inc.
* It is considered confidential and proprietary.
*
* This document may not be reproduced or transmitted in any form,
* in whole or in part, without the express written permission of
* Apple Inc.
*/
#include <arch.h>
#include <debug.h>
#include <drivers/miu.h>
#include <platform.h>
#include <platform/memmap.h>
#include <platform/miu.h>
#include <platform/soc/miu.h>
#include <platform/soc/pmgr.h>
#include <platform/clocks.h>
#include <platform/soc/chipid.h>
#include <platform/soc/hwclocks.h>
static void miu_configure_bridge(const uint32_t *bridge_settings);
#define STATIC_BRIDGE_SHIFT (28)
#define STATIC_BRIDGE_MASK ((1 << STATIC_BRIDGE_SHIFT) - 1)
// !!!FIXME!!! <rdar://problem/19602477> H9: Implement static MIU bridge setting
#define SB_WIDGETS (0 << STATIC_BRIDGE_SHIFT)
#define SOCBUSMUX_WIDGETS (1 << STATIC_BRIDGE_SHIFT)
#define SWITCH_FAB_WIDGETS (2 << STATIC_BRIDGE_SHIFT)
#define CP_WIDGETS (3 << STATIC_BRIDGE_SHIFT)
static const uint64_t bridge_registers[] = {
#if 0 // <rdar://problem/19602477> H9: Implement static MIU bridge setting
SB_BASE_ADDR,
SOC_BUSMUX_BASE_ADDR,
SWTCH_FAB_BASE_ADDR,
CP_COM_BASE_ADDR,
#endif
0
};
#if (APPLICATION_IBOOT && !PRODUCT_IBOOT && !PRODUCT_IBEC)
static const uint32_t bridge_settings_static[] = {
0,0
};
#endif // (APPLICATION_IBOOT && !PRODUCT_IBOOT && !PRODUCT_IBEC)
#if WITH_DEVICETREE
#if SUPPORT_FPGA
struct bridge_list_t {
char *bridge_settings;
uint32_t fpga_enable_mask;
};
#define BRIDGE(b, m) { "bridge-settings-" #b, (m) }
// ALERT: The ordering effects the device tree entries under pmgr node's reg dictionary.
// It also affects the bridge id used in the pmgr device-clock nodes. The
// bridge id must match the id on the device tree bridge-settings-<n> properties.
// NOTE: The second parameter on the BRIDGE macro is used to dynamically determine
// which bridge settings properties should exist based upon the hardware
// blocks actually present on the device.
static const struct bridge_list_t bridge_list[] = {
BRIDGE(0, FPGA_HAS_MEDIA), // Media Bus Mux
BRIDGE(1, FPGA_HAS_MSR), // MSR_AXI2AF
BRIDGE(2, FPGA_HAS_JPEG), // AJPEG_AXI2AF
BRIDGE(3, FPGA_HAS_AVE), // AVE_AXI2AF
BRIDGE(4, FPGA_HAS_VXD), // VDEC0_AXI2AF
BRIDGE(5, FPGA_HAS_ISP), // ISP_DMA_AXI2AF + ISAP_KF_AXI2AF
BRIDGE(6, FPGA_HAS_RTBUSMUX), // RTBusMux
BRIDGE(7, FPGA_HAS_DISP), // Disp0
BRIDGE(8, FPGA_HAS_GFX), // GFX
BRIDGE(9, FPGA_HAS_GFX), // GFX_AFUSER
BRIDGE(10, FPGA_HAS_ALWAYS), // USB
BRIDGE(11, FPGA_HAS_ALWAYS), // PCIe
};
#endif // SUPPORT_FPGA
#endif // WITH_DEVICETREE
extern void ausb_setup_widgets();
int miu_initialize_internal_ram(void)
{
#if APPLICATION_SECUREROM
// Ensure that rPMGR_SCRATCH0-3 get cleared
rPMGR_SCRATCH0 = 0;
rPMGR_SCRATCH1 = 0;
rPMGR_SCRATCH2 = 0;
rPMGR_SCRATCH3 = 0;
#endif /* APPLICATION_SECUREROM */
// Save the Security Epoch in the top byte of PMGR_SCRATCH0
rPMGR_SCRATCH0 &= ~0xFF000000;
rPMGR_SCRATCH0 |= (platform_get_security_epoch()) << 24;
return 0;
}
int miu_init(void)
{
#if APPLICATION_IBOOT && !PRODUCT_IBEC
// Verify that the Security Epoch in PMGR_SCRATCH0 matches
if ((rPMGR_SCRATCH0 >> 24) != platform_get_security_epoch()) {
panic("miu_init: Epoch Mismatch\n");
}
#endif
#if (APPLICATION_IBOOT && !PRODUCT_IBOOT && !PRODUCT_IBEC)
miu_configure_bridge(bridge_settings_static);
#endif
ausb_setup_widgets();
return 0;
}
void miu_suspend(void)
{
/* nothing required for suspend */
}
int miu_initialize_dram(bool resume)
{
RELEASE_ASSERT(!resume);
#if APPLICATION_IBOOT && WITH_HW_DCS
mcu_initialize_dram(resume);
#endif
return 0;
}
void miu_select_remap(enum remap_select sel)
{
switch (sel) {
case REMAP_SRAM:
rSECUREROMCTRL_ROMADDRREMAP = (rSECUREROMCTRL_ROMADDRREMAP & ~MINIPMGR_SECURITY_MCC_ROMADDRREMAP_ROMADDRRREMAP_UMASK) | SECUREROMCTRL_ROMADDRREMAP_SRAM;
break;
case REMAP_SDRAM:
rSECUREROMCTRL_ROMADDRREMAP = (rSECUREROMCTRL_ROMADDRREMAP & ~MINIPMGR_SECURITY_MCC_ROMADDRREMAP_ROMADDRRREMAP_UMASK) | SECUREROMCTRL_ROMADDRREMAP_SDRAM;
break;
}
}
void miu_bypass_prep(void)
{
}
static void miu_configure_bridge(const uint32_t *bridge_settings)
{
volatile uint32_t *reg;
uint32_t cnt = 0, bridge, offset, data;
while ((bridge_settings[cnt] != 0) || (bridge_settings[cnt + 1] != 0)) {
while ((bridge_settings[cnt] != 0) || (bridge_settings[cnt + 1] != 0)) {
bridge = bridge_settings[cnt] >> STATIC_BRIDGE_SHIFT;
offset = bridge_settings[cnt] & STATIC_BRIDGE_MASK;
data = bridge_settings[cnt + 1];
reg = (volatile uint32_t *)(bridge_registers[bridge] + offset);
*reg = data;
cnt += 2;
}
cnt += 2;
}
}
#if WITH_DEVICETREE
#define DEBUG_BRIDGE DEBUG_SPEW // Debug level for bridge messages
void miu_update_device_tree(DTNode *pmgr_node)
{
#if SUPPORT_FPGA
DTNode *node;
char *propName;
void *propData;
uint32_t propSize;
uint32_t fpga_blocks = chipid_get_fpga_block_instantiation();
uint32_t i;
dprintf(DEBUG_INFO, "chipid_get_fpga_block_instantiation() = 0x%08X\n",
fpga_blocks);
if (FindNode(0, "arm-io/pmgr", &node)) {
// For each bridge...
for (i = 0; i < ARRAY_SIZE(bridge_list); i++) {
// Filter out if not supported by FPGA
if (!(fpga_blocks & bridge_list[i].fpga_enable_mask)) {
propName = bridge_list[i].bridge_settings;
if (FindProperty(node, &propName, &propData, &propSize)) {
dprintf(DEBUG_CRITICAL, "Eliding %s\n", propName);
propName[0] = '~';
}
}
}
}
#endif // SUPPORT_FPGA
}
#endif // WITH_DEVICETREE