/* * Copyright (C) 2010-2015 Apple Inc. All rights reserved. * * This document is the property of Apple Inc. * It is considered confidential and proprietary. * * This document may not be reproduced or transmitted in any form, * in whole or in part, without the express written permission of * Apple Inc. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #if WITH_EFFACEABLE_NOR #include #endif extern void dma_init(void); static void platform_init_boot_strap(void); static uint8_t boot_debug; int platform_early_init(void) { #if PRODUCT_LLB || PRODUCT_IBSS /* Verify that the fuses and that the SecureROM has been disabled */ if (!chipid_get_fuse_lock() || (((*(volatile u_int32_t *)SECURITY_REG) & ROM_READ_DISABLE) == 0)) { panic("Fuses are unlocked or SecureROM is enabled"); } #endif #if WITH_HW_PLATFORM_POWER /* initialize the s5l8945x pmgr driver */ platform_power_init(); #endif #if WITH_HW_MIU /* CIF, SCU, remap setup */ miu_init(); #endif #if WITH_HW_CLOCKS /* initialize the clock driver */ clocks_init(); #endif #if WITH_HW_AIC /* initialize the AIC, mask all interrupts */ interrupt_init(); #endif #if WITH_HW_TIMER timer_init(0); #endif #if WITH_HW_USBPHY usbphy_power_down(); #endif #if WITH_HW_UART /* do whatever uart initialization we need to get a simple console */ uart_init(); #if !RELEASE_BUILD && (PRODUCT_IBSS || PRODUCT_IBEC) debug_enable_uarts(3); #endif #endif #if WITH_SHM_CONSOLE shmcon_init(); #endif #if WITH_IIC iic_init(); #endif #if !PRODUCT_IBOOT && !PRODUCT_IBEC platform_init_power(); #if WITH_BOOT_STAGE boot_check_stage(); #endif #endif #if WITH_BOOT_STAGE boot_set_stage(kPowerNVRAMiBootStageProductStart); #endif #if WITH_HW_POWER power_get_nvram(kPowerNVRAMiBootDebugKey, &boot_debug); debug_enable_uarts(boot_debug); #endif #if WITH_HW_DMA /* initialize the dma engine */ dma_init(); #endif #if WITH_TARGET_CONFIG target_early_init(); #endif return 0; } int platform_late_init(void) { #if WITH_ENV /* publish secure-boot flag for restore mode */ env_set_uint("secure-boot", 1, 0); #endif #if WITH_HW_USB && WITH_USB_MODE_RECOVERY usb_early_init(); #endif #if WITH_HW_POWER power_late_init(); #endif #if WITH_TARGET_CONFIG target_late_init(); #endif #if WITH_NAND flash_nand_id(); #endif return 0; } int platform_init_setup_clocks(void) { #if WITH_HW_CLOCKS clocks_set_default(); #endif return 0; } int platform_init_hwpins(void) { // need board id to select default pinconfig platform_init_boot_strap(); #if WITH_HW_GPIO /* finish initializing the gpio driver */ gpio_init_pinconfig(); #endif return 0; } int platform_init_internal_mem(void) { #if WITH_HW_MIU /* initialize sram bus */ miu_initialize_internal_ram(); #endif return 0; } int platform_init_mainmem(bool resume) { #if WITH_HW_MIU && APPLICATION_IBOOT /* initialize sdram */ miu_initialize_dram(resume); /* always remap the memory region at this point, regardless of resume, * because the early MMU init always runs and we have to fix up. */ platform_init_mainmem_map(); #endif return 0; } void platform_init_mainmem_map(void) { #if APPLICATION_IBOOT arm_mmu_map_section_range(SDRAM_BASE, SDRAM_BASE, ROUNDUP(SDRAM_BANK_LEN * SDRAM_BANK_COUNT, MB)/MB, kARMMMUNormal, true, true); #endif } int platform_init_power(void) { #if WITH_HW_POWER power_init(); #endif return 0; } static bool gDisplayEnabled; int platform_init_display(void) { #if WITH_HW_DISPLAYPIPE static bool displayInitOnce; uint32_t backlight_level = 0; int result = 0; /* initialize the display if not already enabled */ if (!gDisplayEnabled) { if (!displayInitOnce) { platform_quiesce_display(); clock_gate(CLK_HPERFRT, true); clock_gate(CLK_DISPOUT, true); result = display_init(); } else result = -1; /* if initialization fails, make sure we never try again. On success, gDisplayEnabled will be set, * ensuring no reinitialization unless platform_quiesce_display is called first. */ if (result != 0) { displayInitOnce = true; } } if (result == 0) { gDisplayEnabled = true; backlight_level = env_get_uint("backlight-level", 0xffffffff); } power_backlight_enable(backlight_level); #endif return 0; } int platform_init_display_mem(addr_t *base, size_t *size) { #if WITH_HW_DISPLAYPIPE u_int32_t base_rounded = *base; u_int32_t end_rounded = *base + *size; u_int32_t size_rounded = *size; /* Map the framebuffer as device memory and * round the base and size to the mapping granule. */ base_rounded = ROUNDDOWN(base_rounded, MB); end_rounded = ROUNDUP(end_rounded, MB); size_rounded = end_rounded - base_rounded; arm_mmu_map_section_range(base_rounded, base_rounded, size_rounded/MB, kARMMMUWriteCombined, false, true); *base = base_rounded; *size = size_rounded; #endif return 0; } int platform_init_mass_storage(void) { #if WITH_NAND_FILESYSTEM flash_nand_init(); #endif return 0; } int platform_quiesce_hardware(enum boot_target target) { bool quiesce_clocks = false; #if APPLICATION_SECUREROM quiesce_clocks = true; #endif #if WITH_TARGET_CONFIG target_quiesce_hardware(); #endif #if WITH_HW_USB usb_quiesce(); #endif switch (target) { case BOOT_HALT: case BOOT_DARWIN_RESTORE: break; case BOOT_IBOOT: case BOOT_DARWIN: #if WITH_BOOT_STAGE boot_set_stage(kPowerNVRAMiBootStageProductEnd); #endif break; case BOOT_DIAGS: case BOOT_SECUREROM: quiesce_clocks = true; // fall through to default default: #if WITH_BOOT_STAGE boot_set_stage(kPowerNVRAMiBootStageOff); #endif break; } #if WITH_HW_TIMER timer_stop_all(); #endif #if WITH_HW_AIC interrupt_mask_all(); #endif if (quiesce_clocks) { #if WITH_HW_CLOCKS clocks_quiesce(); #endif } #if APPLICATION_IBOOT switch (target) { case BOOT_IBOOT : break; default: break; } #endif return 0; } int platform_quiesce_display(void) { #if WITH_HW_DISPLAYPIPE // Turn off the back light power_backlight_enable(0); clock_gate(CLK_HPERFRT, true); clock_gate(CLK_DISPOUT, true); /* quiesce the panel */ if (display_quiesce(true) == ENXIO) { clock_gate(CLK_HPERFRT, false); clock_gate(CLK_DISPOUT, false); } #endif gDisplayEnabled = false; return 0; } int platform_bootprep(enum boot_target target) { u_int32_t gids = ~0, uids = ~0; /* leave crypto keys alone by default */ /* prepare hardware for booting into various targets */ #if WITH_HW_CLOCKS if (target != BOOT_IBOOT) clocks_set_performance(kPerformanceHigh); #endif #if WITH_TARGET_CONFIG target_bootprep(target); #endif /* If we're not restoring, reset the watchdog-on-wake until enabled */ if ((boot_debug & kPowerNVRAMiBootDebugWDTWake) && (target == BOOT_DARWIN)) { boot_debug &= ~kPowerNVRAMiBootDebugWDTWake; #if WITH_HW_POWER power_set_nvram(kPowerNVRAMiBootDebugKey, boot_debug); #endif } switch (target) { #if APPLICATION_IBOOT case BOOT_DARWIN_RESTORE: platform_quiesce_display(); case BOOT_DARWIN: if (boot_debug & kPowerNVRAMiBootDebugWDTWake) wdt_enable(); /* even when trusted, Darwin only gets the UID / GID1 */ uids = 1; gids = 2; #if WITH_HW_MIU miu_select_remap(REMAP_SDRAM); #endif break; case BOOT_DIAGS: platform_quiesce_display(); #if WITH_BOOT_STAGE boot_clear_error_count(); #endif break; case BOOT_IBOOT: #endif case BOOT_SECUREROM: platform_quiesce_display(); #if WITH_HW_MIU miu_select_remap(REMAP_SDRAM); #endif break; case BOOT_UNKNOWN: platform_quiesce_display(); break; default: ; // do nothing } /* if we left the fuse unlocked for boot image processing, * lock it now, after optionally switching from production to * development fusing. */ if (security_get_production_override()) chipid_clear_production_mode(); chipid_set_fuse_lock(true); /* Let security override keys */ if (!security_allow_modes(kSecurityModeGIDKeyAccess)) gids = 0; if (!security_allow_modes(kSecurityModeUIDKeyAccess)) uids = 0; /* disable all keys not requested */ platform_disable_keys(~gids, ~uids); return 0; } void platform_mmu_setup(bool resume) { RELEASE_ASSERT(false == resume); /* mark usable ram as cached/buffered */ arm_mmu_map_section_range(SRAM_BASE, SRAM_BASE, ROUNDUP(SRAM_BANK_LEN, MB)/MB, kARMMMUNormal, false, false); #if APPLICATION_SECUREROM arm_mmu_map_section_range(VROM_BASE, VROM_BASE, ROUNDUP(VROM_BANK_LEN, MB)/MB, kARMMMUNormal, false, false); #endif /* Remap text base is to zero (for exception vectors) */ arm_mmu_map_section(0, TEXT_BASE, kARMMMUNormalRX, false); #ifdef MMU_NONCACHE0_SIZE /* create the noncached0 mapping */ arm_mmu_map_section_range(MMU_NONCACHE0_VBASE, MMU_NONCACHE0_PBASE, ROUNDUP(MMU_NONCACHE0_SIZE, MB)/MB, kARMMMUStronglyOrdered, false, false); #endif #ifdef MMU_NONCACHE1_SIZE /* create the noncached1 mapping */ arm_mmu_map_section_range(MMU_NONCACHE1_VBASE, MMU_NONCACHE1_PBASE, ROUNDUP(MMU_NONCACHE1_SIZE, MB)/MB, kARMMMUStronglyOrdered, false, false); #endif /* in cases where we are running from DRAM, remap it now */ if ((TEXT_BASE >= SDRAM_BASE) && (TEXT_BASE < SDRAM_END)) { platform_init_mainmem_map(); } } int platform_init(void) { #if WITH_HW_SPI spi_init(); #endif #if WITH_NAND_BOOT nand_boot_init(); #endif #if WITH_TARGET_CONFIG target_init(); #endif #if WITH_EFFACEABLE_NOR effaceable_nor_init(); #endif return 0; } int platform_debug_init(void) { #if WITH_HW_USB u_int32_t usb_enabled = 1; #if WITH_ENV && SUPPORT_FPGA usb_enabled = env_get_uint("usb-enabled", 1); #endif if (usb_enabled) usb_init(); #endif #if WITH_TARGET_CONFIG target_debug_init(); #endif return 0; } void platform_poweroff(void) { platform_quiesce_display(); #if WITH_TARGET_CONFIG target_poweroff(); #endif #if WITH_HW_POWER boot_set_stage(kPowerNVRAMiBootStageOff); power_shutdown(); #endif for(;;); } u_int32_t platform_set_performance(u_int32_t performance_level) { u_int32_t old_performance_level = kPerformanceHigh; #if WITH_HW_CLOCKS old_performance_level = clocks_set_performance(performance_level); #endif return old_performance_level; } #if WITH_DEVICETREE int platform_update_device_tree(void) { DTNode *node; u_int32_t propSize; char *propName; void *propData; // Find the cpu0 node. if (FindNode(0, "cpus/cpu0", &node)) { // Fill in the cpu frequency propName = "clock-frequency"; if (FindProperty(node, &propName, &propData, &propSize)) { *(uint32_t *)propData = clock_get_frequency(CLK_CPU); } // Fill in the memory frequency propName = "memory-frequency"; if (FindProperty(node, &propName, &propData, &propSize)) { *(uint32_t *)propData = clock_get_frequency(CLK_MEM); } // Fill in the bus frequency propName = "bus-frequency"; if (FindProperty(node, &propName, &propData, &propSize)) { *(uint32_t *)propData = clock_get_frequency(CLK_BUS); } // Fill in the peripheral frequency propName = "peripheral-frequency"; if (FindProperty(node, &propName, &propData, &propSize)) { *(uint32_t *)propData = clock_get_frequency(CLK_PERIPH); } // Fill in the fixed frequency propName = "fixed-frequency"; if (FindProperty(node, &propName, &propData, &propSize)) { *(uint32_t *)propData = clock_get_frequency(CLK_FIXED); } // Fill in the time base frequency propName = "timebase-frequency"; if (FindProperty(node, &propName, &propData, &propSize)) { *(uint32_t *)propData = clock_get_frequency(CLK_TIMEBASE); } } // Find the arm-io node if (FindNode(0, "arm-io", &node)) { // Fill in the clock-frequencies table propName = "clock-frequencies"; if (FindProperty(node, &propName, &propData, &propSize)) { clock_get_frequencies(propData, propSize / sizeof(u_int32_t)); } // Fill in the usb-phy frequency propName = "usbphy-frequency"; if (FindProperty(node, &propName, &propData, &propSize)) { *(uint32_t *)propData = clock_get_frequency(CLK_USBPHYCLK); } } // Find the pmgr node if (FindNode(0, "arm-io/pmgr", &node)) { pmgr_update_device_tree(node); miu_update_device_tree(node); } // Find the audio-complex node if (FindNode(0, "arm-io/audio-complex", &node)) { // Fill in the ncoref-frequency frequency propName = "ncoref-frequency"; if (FindProperty(node, &propName, &propData, &propSize)) { *(uint32_t *)propData = clock_get_frequency(CLK_NCOREF); } } #if WITH_HW_PLATFORM_CHIPID // Find the arm-io node if (FindNode(0, "arm-io", &node)) { // Fill in the chip-revision property propName = "chip-revision"; if (FindProperty(node, &propName, &propData, &propSize)) { *(uint32_t *)propData = platform_get_chip_revision(); } } #endif #if WITH_NAND_FILESYSTEM if (FindNode(0, "arm-io/flash-controller0/disk", &node)) { fillNandConfigProperties(node); } #endif #if WITH_HW_USBPHY // Find the otgphyctrl node if (FindNode(0, "arm-io/otgphyctrl0", &node)) { usbphy_update_device_tree(node); } #endif return target_update_device_tree(); } #endif static void platform_init_boot_strap(void) { u_int32_t boot_strap, chip_board_id, gpio_board_id, boot_config; // If rPMGR_SCRATCH0[0] set then boot strap already valid if ((rPMGR_SCRATCH0 & kPlatformScratchFlagBootStrap) != 0) return; gpio_configure(GPIO_BOARD_ID0, GPIO_CFG_IN); gpio_configure(GPIO_BOARD_ID1, GPIO_CFG_IN); gpio_configure(GPIO_BOARD_ID2, GPIO_CFG_IN); gpio_configure(GPIO_BOARD_ID3, GPIO_CFG_IN); gpio_configure_pupdn(GPIO_BOARD_ID0, GPIO_PDN); gpio_configure_pupdn(GPIO_BOARD_ID1, GPIO_PDN); gpio_configure_pupdn(GPIO_BOARD_ID2, GPIO_PDN); gpio_configure_pupdn(GPIO_BOARD_ID3, GPIO_PDN); gpio_configure(GPIO_BOOT_CONFIG0, GPIO_CFG_IN); gpio_configure(GPIO_BOOT_CONFIG1, GPIO_CFG_IN); gpio_configure(GPIO_BOOT_CONFIG2, GPIO_CFG_IN); gpio_configure(GPIO_BOOT_CONFIG3, GPIO_CFG_IN); gpio_configure_pupdn(GPIO_BOOT_CONFIG0, GPIO_PDN); gpio_configure_pupdn(GPIO_BOOT_CONFIG1, GPIO_PDN); gpio_configure_pupdn(GPIO_BOOT_CONFIG2, GPIO_PDN); gpio_configure_pupdn(GPIO_BOOT_CONFIG3, GPIO_PDN); platform_power_spin(100); // Wait 100us chip_board_id = chipid_get_board_id(); gpio_board_id = (gpio_read(GPIO_BOARD_ID3) << 3) | (gpio_read(GPIO_BOARD_ID2) << 2) | (gpio_read(GPIO_BOARD_ID1) << 1) | (gpio_read(GPIO_BOARD_ID0) << 0); boot_config = (gpio_read(GPIO_BOOT_CONFIG3) << 3) | (gpio_read(GPIO_BOOT_CONFIG2) << 2) | (gpio_read(GPIO_BOOT_CONFIG1) << 1) | (gpio_read(GPIO_BOOT_CONFIG0) << 0); gpio_configure(GPIO_BOARD_ID0, GPIO_CFG_DFLT); gpio_configure(GPIO_BOARD_ID1, GPIO_CFG_DFLT); gpio_configure(GPIO_BOARD_ID2, GPIO_CFG_DFLT); gpio_configure(GPIO_BOARD_ID3, GPIO_CFG_DFLT); gpio_configure(GPIO_BOOT_CONFIG0, GPIO_CFG_DFLT); gpio_configure(GPIO_BOOT_CONFIG1, GPIO_CFG_DFLT); gpio_configure(GPIO_BOOT_CONFIG2, GPIO_CFG_DFLT); gpio_configure(GPIO_BOOT_CONFIG3, GPIO_CFG_DFLT); boot_strap = (((chip_board_id << 4) | gpio_board_id) << 16) | (boot_config << 8) | (0x01 << 0); rPMGR_SCRATCH0 = (rPMGR_SCRATCH0 & 0xFF000000) | (boot_strap & 0x00FFFFFF); } u_int32_t platform_get_board_id(void) { u_int32_t board_id; ASSERT((rPMGR_SCRATCH0 & kPlatformScratchFlagBootStrap) != 0); board_id = (rPMGR_SCRATCH0 >> 16) & 0xFF; return board_id; } u_int32_t platform_get_boot_config(void) { u_int32_t boot_config; boot_config = (rPMGR_SCRATCH0 >> 8) & 0xFF; return boot_config; } bool platform_get_boot_device(int32_t index, enum boot_device *boot_device, u_int32_t *boot_flag, u_int32_t *boot_arg) { u_int32_t boot_config = platform_get_boot_config(); /* S5L8945X supports one boot device then USB-DFU per boot config */ /* If the index is not zero force DFU mode */ if (index != 0) index = 1; switch (boot_config) { case 0: /* SPI 0 */ *boot_device = BOOT_DEVICE_SPI; *boot_flag = 0; *boot_arg = 0; break; case 1: /* SPI 3 */ *boot_device = BOOT_DEVICE_SPI; *boot_flag = 0; *boot_arg = 3; break; case 2: /* SPI 0 Test Mode */ *boot_device = BOOT_DEVICE_SPI; *boot_flag = BOOT_FLAG_TEST_MODE; *boot_arg = 0; break; case 3: /* SPI 3 Test Mode */ *boot_device = BOOT_DEVICE_SPI; *boot_flag = BOOT_FLAG_TEST_MODE; *boot_arg = 3; break; case 4: /* FMI0 2 CS */ *boot_device = BOOT_DEVICE_NAND; *boot_flag = 0; *boot_arg = 2 << 0; break; case 5: /* FMI0 4 CS */ *boot_device = BOOT_DEVICE_NAND; *boot_flag = 0; *boot_arg = 4 << 0; break; case 6: /* FMI0 4 CS Test Mode */ *boot_device = BOOT_DEVICE_NAND; *boot_flag = BOOT_FLAG_TEST_MODE; *boot_arg = 4 << 0; break; /* case 7: Unused */ case 8: /* FMI1 2 CS */ *boot_device = BOOT_DEVICE_NAND; *boot_flag = 0; *boot_arg = 2 << 8; break; case 9: /* FMI1 4 CS */ *boot_device = BOOT_DEVICE_NAND; *boot_flag = 0; *boot_arg = 4 << 8; break; case 10: /* FMI1 4 CS Test Mode */ *boot_device = BOOT_DEVICE_NAND; *boot_flag = BOOT_FLAG_TEST_MODE; *boot_arg = 4 << 8; break; /* case 11: Unused */ case 12: /* FMI0/1 2/2 CS */ *boot_device = BOOT_DEVICE_NAND; *boot_flag = 0; *boot_arg = (2 << 8) | (2 << 0); break; case 13: /* FMI0/1 4/4 CS */ *boot_device = BOOT_DEVICE_NAND; *boot_flag = 0; *boot_arg = (4 << 8) | (4 << 0); break; case 14: /* FMI0/1 4/4 CS Test Mode */ *boot_device = BOOT_DEVICE_NAND; *boot_flag = BOOT_FLAG_TEST_MODE; *boot_arg = (4 << 8) | (4 << 0); break; /* case 15: Unused */ default: return false; } /* Change boot_device and boot_arg for DFU Mode */ /* Don't change flags */ if (index == 1) { *boot_device = BOOT_DEVICE_USBDFU; *boot_arg = 0; } return true; } /* * boot_interface_pin tables * tables are executed in order for disable and reverse order for enable * */ struct boot_interface_pin { gpio_t pin; u_int32_t enable; u_int32_t disable; }; #if WITH_HW_FLASH_NOR && WITH_HW_FLASH_NOR_SPI static const struct boot_interface_pin spi0_boot_interface_pins[] = { #if SUPPORT_FPGA { GPIO( 1, 3), GPIO_CFG_FUNC0, GPIO_CFG_DFLT }, // SPI0_SSIN #else { GPIO( 1, 3), GPIO_CFG_OUT_1, GPIO_CFG_DFLT }, // SPI0_SSIN #endif { GPIO( 1, 0), GPIO_CFG_FUNC0, GPIO_CFG_DFLT }, // SPI0_SCLK { GPIO( 1, 1), GPIO_CFG_FUNC0, GPIO_CFG_DFLT }, // SPI0_MOSI { GPIO( 1, 2), GPIO_CFG_FUNC0, GPIO_CFG_DFLT } // SPI0_MISO }; static const struct boot_interface_pin spi3_boot_interface_pins[] = { #if SUPPORT_FPGA { GPIO(19, 5), GPIO_CFG_FUNC0, GPIO_CFG_DFLT }, // SPI3_SSIN #else { GPIO(19, 5), GPIO_CFG_OUT_1, GPIO_CFG_DFLT }, // SPI3_SSIN #endif { GPIO(19, 4), GPIO_CFG_FUNC0, GPIO_CFG_DFLT }, // SPI3_SCLK { GPIO(19, 2), GPIO_CFG_FUNC0, GPIO_CFG_DFLT }, // SPI3_MOSI { GPIO(19, 3), GPIO_CFG_FUNC0, GPIO_CFG_DFLT } // SPI3_MISO }; #endif /* WITH_HW_FLASH_NOR && WITH_HW_FLASH_NOR_SPI */ #if WITH_HW_BOOTROM_NAND /* Note: The code below expects this table to begin with CS3 through CS0 */ static const struct boot_interface_pin fmi0_boot_interface_pins[] = { { GPIO(23, 3), GPIO_CFG_FUNC0, GPIO_CFG_DFLT }, // FMI0_CEN3 { GPIO(23, 4), GPIO_CFG_FUNC0, GPIO_CFG_DFLT }, // FMI0_CEN2 { GPIO(23, 5), GPIO_CFG_FUNC0, GPIO_CFG_DFLT }, // FMI0_CEN1 { GPIO(23, 6), GPIO_CFG_FUNC0, GPIO_CFG_DFLT }, // FMI0_CEN0 { GPIO(23, 2), GPIO_CFG_FUNC0, GPIO_CFG_DFLT }, // FMI0_CLE { GPIO(23, 1), GPIO_CFG_FUNC0, GPIO_CFG_DFLT }, // FMI0_ALE { GPIO(22, 7), GPIO_CFG_FUNC0, GPIO_CFG_DFLT }, // FMI0_REN { GPIO(23, 0), GPIO_CFG_FUNC0, GPIO_CFG_DFLT }, // FMI0_WEN { GPIO(22, 6), GPIO_CFG_FUNC0, GPIO_CFG_DFLT }, // FMI0_IO0 { GPIO(22, 5), GPIO_CFG_FUNC0, GPIO_CFG_DFLT }, // FMI0_IO1 { GPIO(22, 4), GPIO_CFG_FUNC0, GPIO_CFG_DFLT }, // FMI0_IO2 { GPIO(22, 3), GPIO_CFG_FUNC0, GPIO_CFG_DFLT }, // FMI0_IO3 { GPIO(22, 1), GPIO_CFG_FUNC0, GPIO_CFG_DFLT }, // FMI0_IO4 { GPIO(22, 0), GPIO_CFG_FUNC0, GPIO_CFG_DFLT }, // FMI0_IO5 { GPIO(21, 7), GPIO_CFG_FUNC0, GPIO_CFG_DFLT }, // FMI0_IO6 { GPIO(21, 6), GPIO_CFG_FUNC0, GPIO_CFG_DFLT } // FMI0_IO7 }; /* Note: The code below expects this table to begin with CS3 through CS0 */ static const struct boot_interface_pin fmi1_boot_interface_pins[] = { { GPIO(25, 4), GPIO_CFG_FUNC0, GPIO_CFG_DFLT }, // FMI1_CEN3 { GPIO(25, 5), GPIO_CFG_FUNC0, GPIO_CFG_DFLT }, // FMI1_CEN2 { GPIO(25, 6), GPIO_CFG_FUNC0, GPIO_CFG_DFLT }, // FMI1_CEN1 { GPIO(25, 7), GPIO_CFG_FUNC0, GPIO_CFG_DFLT }, // FMI1_CEN0 { GPIO(25, 3), GPIO_CFG_FUNC0, GPIO_CFG_DFLT }, // FMI1_CLE { GPIO(25, 2), GPIO_CFG_FUNC0, GPIO_CFG_DFLT }, // FMI1_ALE { GPIO(25, 0), GPIO_CFG_FUNC0, GPIO_CFG_DFLT }, // FMI1_REN { GPIO(25, 1), GPIO_CFG_FUNC0, GPIO_CFG_DFLT }, // FMI1_WEN { GPIO(24, 7), GPIO_CFG_FUNC0, GPIO_CFG_DFLT }, // FMI1_IO0 { GPIO(24, 6), GPIO_CFG_FUNC0, GPIO_CFG_DFLT }, // FMI1_IO1 { GPIO(24, 5), GPIO_CFG_FUNC0, GPIO_CFG_DFLT }, // FMI1_IO2 { GPIO(24, 4), GPIO_CFG_FUNC0, GPIO_CFG_DFLT }, // FMI1_IO3 { GPIO(24, 2), GPIO_CFG_FUNC0, GPIO_CFG_DFLT }, // FMI1_IO4 { GPIO(24, 1), GPIO_CFG_FUNC0, GPIO_CFG_DFLT }, // FMI1_IO5 { GPIO(24, 0), GPIO_CFG_FUNC0, GPIO_CFG_DFLT }, // FMI1_IO6 { GPIO(23, 7), GPIO_CFG_FUNC0, GPIO_CFG_DFLT } // FMI1_IO7 }; #endif /* WITH_HW_BOOTROM_NAND */ void platform_enable_boot_interface(bool enable, enum boot_device boot_device, u_int32_t boot_arg) { const struct boot_interface_pin *pins0 = 0; const struct boot_interface_pin *pins1 = 0; u_int32_t cnt, func, pin_count0 = 0, pin_count1 = 0; gpio_t pin; switch (boot_device) { #if WITH_HW_FLASH_NOR && WITH_HW_FLASH_NOR_SPI case BOOT_DEVICE_SPI : if (boot_arg == 0) { pins0 = spi0_boot_interface_pins; pin_count0 = (sizeof(spi0_boot_interface_pins) / sizeof(spi0_boot_interface_pins[0])); } else if (boot_arg == 3) { pins0 = spi3_boot_interface_pins; pin_count0 = (sizeof(spi3_boot_interface_pins) / sizeof(spi3_boot_interface_pins[0])); } break; #endif /* WITH_HW_FLASH_NOR && WITH_HW_FLASH_NOR_SPI */ #if WITH_HW_BOOTROM_NAND case BOOT_DEVICE_NAND : pins0 = fmi0_boot_interface_pins; pin_count0 = (sizeof(fmi0_boot_interface_pins) / sizeof(fmi0_boot_interface_pins[0])); switch ((boot_arg >> 0) & 0xFF) { case 4: /* CS x4 - skip no pin */ break; case 2: /* CS x2 - skip 2 pins */ pins0 += 2; pin_count0 -= 2; break; default: pins0 = 0; pin_count0 = 0; break; } pins1 = fmi1_boot_interface_pins; pin_count1 = (sizeof(fmi1_boot_interface_pins) / sizeof(fmi1_boot_interface_pins[0])); switch ((boot_arg >> 8) & 0xFF) { case 4: /* CS x4 - skip no pin */ break; case 2: /* CS x2 - skip 2 pins */ pins1 += 2; pin_count1 -= 2; break; default: pins1 = 0; pin_count1 = 0; break; } break; #endif /* WITH_HW_BOOTROM_NAND */ #if WITH_USB_DFU case BOOT_DEVICE_USBDFU : /* USB is always configured */ break; #endif /* WITH_USB_DFU */ default : break; } for (cnt = 0; cnt < pin_count0; cnt++) { if (enable) { pin = pins0[pin_count0 - 1 - cnt].pin; func = pins0[pin_count0 - 1 - cnt].enable; } else { pin = pins0[cnt].pin; func = pins0[cnt].disable; } dprintf(DEBUG_INFO, "platform_enable_boot_interface: 0 %x, %x\n", pin, func); gpio_configure(pin, func); } for (cnt = 0; cnt < pin_count1; cnt++) { if (enable) { pin = pins1[pin_count1 - 1 - cnt].pin; func = pins1[pin_count1 - 1 - cnt].enable; } else { pin = pins1[cnt].pin; func = pins1[cnt].disable; } dprintf(DEBUG_INFO, "platform_enable_boot_interface: 1 %x, %x\n", pin, func); gpio_configure(pin, func); } } u_int64_t platform_get_nonce(void) { u_int64_t nonce; u_int32_t *nonce_words = (u_int32_t *)&nonce; // If rPMGR_SCRATCH0[1] set then the nonce has already been generated if ((rPMGR_SCRATCH0 & kPlatformScratchFlagNonce) == 0) { nonce = platform_consume_nonce(); rPMGR_SCRATCH14 = nonce_words[0]; rPMGR_SCRATCH15 = nonce_words[1]; rPMGR_SCRATCH0 |= kPlatformScratchFlagNonce; } else { nonce_words[0] = rPMGR_SCRATCH14; nonce_words[1] = rPMGR_SCRATCH15; } return nonce; } bool platform_get_ecid_image_personalization_required(void) { return chipid_get_ecid_image_personalization_required(); } u_int32_t platform_get_osc_frequency(void) { return chipid_get_osc_frequency(); } // Let the target's rules.mk override the high core voltage point #ifndef TARGET_HIGH_SOC_VOLTAGE #define TARGET_HIGH_SOC_VOLTAGE CHIPID_SOC_VOLTAGE_HIGH #endif u_int32_t platform_get_base_soc_voltage(void) { return chipid_get_soc_voltage(TARGET_HIGH_SOC_VOLTAGE); } // Let the target's rules.mk override the high cpu voltage point #ifndef TARGET_HIGH_CPU_VOLTAGE #define TARGET_HIGH_CPU_VOLTAGE CHIPID_CPU_VOLTAGE_HIGH #endif u_int32_t platform_get_base_cpu_voltage(void) { return chipid_get_cpu_voltage(TARGET_HIGH_CPU_VOLTAGE); } static const u_int32_t soc_voltage_points[] = { CHIPID_SOC_VOLTAGE_MED, TARGET_HIGH_SOC_VOLTAGE }; int platform_get_soc_voltages(u_int32_t count, u_int32_t *voltages) { u_int32_t cnt, points = sizeof(soc_voltage_points) / sizeof(soc_voltage_points[0]); if (voltages == 0) return -1; if (count > points) count = points; for (cnt = 0; cnt < count; cnt++) { voltages[cnt] = chipid_get_soc_voltage(soc_voltage_points[cnt]); } return 0; } static const u_int32_t cpu_voltage_points[] = { CHIPID_CPU_VOLTAGE_MED, TARGET_HIGH_CPU_VOLTAGE }; int platform_get_cpu_voltages(u_int32_t count, u_int32_t *voltages) { u_int32_t cnt, points = sizeof(cpu_voltage_points) / sizeof(cpu_voltage_points[0]); if (voltages == 0) return -1; if (count > points) count = points; for (cnt = 0; cnt < count; cnt++) { voltages[cnt] = chipid_get_cpu_voltage(cpu_voltage_points[cnt]); } return 0; } int platform_convert_voltages(int buck, u_int32_t count, u_int32_t *voltages) { #if WITH_HW_POWER u_int32_t index; if (voltages == 0) return -1; for (index = 0; index < count; index++) { if (0 != power_get_buck_value(buck, voltages[index], &voltages[index])) return -1; } return 0; #else return -1; #endif } bool platform_get_usb_cable_connected(void) { #if WITH_HW_USBPHY return usbphy_is_cable_connected(); #else return false; #endif } void platform_set_dfu_status(bool dfu) { gpio_write(GPIO_DFU_STATUS, dfu); } bool platform_get_force_dfu(void) { #if SUPPORT_FPGA return !gpio_read(GPIO_FORCE_DFU); #else return gpio_read(GPIO_FORCE_DFU); #endif } bool platform_get_request_dfu1(void) // Formerly platform_get_hold_key() { return !gpio_read(GPIO_REQUEST_DFU1); } bool platform_get_request_dfu2(void) // Formerly platform_get_menu_key() { return !gpio_read(GPIO_REQUEST_DFU2); } int platform_translate_key_selector(u_int32_t key_selector, u_int32_t *key_opts) { bool production = platform_get_current_production_mode(); switch (key_selector) { case IMAGE_KEYBAG_SELECTOR_PROD : if (!production) return -1; break; case IMAGE_KEYBAG_SELECTOR_DEV : if (production) return -1; break; default : return -1; } *key_opts = AES_KEY_TYPE_GID0 | AES_KEY_SIZE_256; return 0; } bool platform_set_usb_brick_detect(int select) { #if WITH_HW_USBPHY return usbphy_set_dpdm_monitor(select); #else return false; #endif } #if APPLICATION_IBOOT u_int64_t platform_get_memory_size(void) { u_int64_t memory_size; // If rPMGR_SCRATCH0[2] set then the memory was inited, we have memory size info if ((rPMGR_SCRATCH0 & kPlatformScratchFlagMemoryInfo) != 0) { memory_size = (rPMGR_SCRATCH13 & 0xffff) * 1024 * 1024; } else { panic("memory not yet inited\n"); } return memory_size; } u_int8_t platform_get_memory_manufacturer_id(void) { // If rPMGR_SCRATCH0[2] set then the memory was inited, we have memory vendor-id info if ((rPMGR_SCRATCH0 & kPlatformScratchFlagMemoryInfo) != 0) { return ((rPMGR_SCRATCH13 >> 28) & 0xf); } else { panic("memory not yet inited\n"); } } void platform_set_memory_info(u_int8_t manuf_id, u_int64_t memory_size) { if ((rPMGR_SCRATCH0 & kPlatformScratchFlagMemoryInfo) == 0) { rPMGR_SCRATCH13 = 0; } rPMGR_SCRATCH13 = (manuf_id << 28) | (memory_size & 0xffff); rPMGR_SCRATCH0 |= kPlatformScratchFlagMemoryInfo; } #endif