IAmChrisAMA
/
iBoot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
iBoot/drivers/apple/amc/amc.c

791 lines
25 KiB
C
Raw Permalink Blame History

/*
* Copyright (C) 2009-2014 Apple Inc. All rights reserved.
*
* This document is the property of Apple Inc.
* It is considered confidential and proprietary.
*
* This document may not be reproduced or transmitted in any form,
* in whole or in part, without the express written permission of
* Apple Inc.
*/
#include <debug.h>
#include <drivers/amc/amc.h>
#include <drivers/amc/amc_phy.h>
#include <drivers/amc/amc_regs.h>
#include <drivers/dram.h>
#include <drivers/miu.h>
#include <lib/env.h>
#include <platform.h>
#include <platform/soc/hwclocks.h>
#include <platform/memmap.h>
#include <platform/timer.h>
#include <sys.h>
#include <string.h>
#include <target.h>
// if there are separate ap/dev parameters, amc_init will copy
// the appropriate ones here
#if AMC_PARAMS_AP_DEV
static struct amc_param amc_params;
#endif
static bool amc_params_initialized;
static const struct amc_channel_addrs {
volatile uint32_t *rnkcfg;
volatile uint32_t *mrcmd;
volatile uint32_t *mrstatus;
uint32_t mrpoll;
uint32_t mrshift;
volatile uint32_t *initcmd;
volatile uint32_t *initstatus;
uint32_t mcuen;
} _amc_chregs[] = {
{ &rAMC_CH0RNKCFG0, &rAMC_CH0MRCMD, &rAMC_CH01MRSTATUS, 0x01, 8, &rAMC_CH0INITCMD, &rAMC_CH01INITSTATUS, 0x0001 },
{ &rAMC_CH1RNKCFG0, &rAMC_CH1MRCMD, &rAMC_CH01MRSTATUS, 0x10, 16, &rAMC_CH1INITCMD, &rAMC_CH01INITSTATUS, 0x0100 },
{ &rAMC_CH2RNKCFG0, &rAMC_CH2MRCMD, &rAMC_CH23MRSTATUS, 0x01, 8, &rAMC_CH2INITCMD, &rAMC_CH23INITSTATUS, 0x0010 },
{ &rAMC_CH3RNKCFG0, &rAMC_CH3MRCMD, &rAMC_CH23MRSTATUS, 0x10, 16, &rAMC_CH3INITCMD, &rAMC_CH23INITSTATUS, 0x1000 },
};
static struct amc_memory_device_info _amc_device_info;
static bool _amc_device_info_inited;
// Local static functions
static uint32_t amc_odd_parity(uint32_t input);
/*
* Based on H4P/H4G AMC UM 0.63, H4 Tunables 0.36,
* H5P/Bali AMC UM 0.48, H5P/Bali Tunables 0.63
* Alcatraz AMC Init.html (A0: AMC: 3.53.5 AMP: 2.13.0 (v22). B0: 3.56.4 AMP: 2.13.1 (v76))
* Alcatraz A0 AMC Tunables dated Dec 8, 2012
* M7 AMC Init.html (AMC: 12.3.0 AMP: 5.7.0, dated Wed Mar 11 17:47:57 2014, Tunables as of Apr 9, 2014)
*/
void amc_mrcmd(amc_mrcmd_op_t op, uint8_t channels, uint8_t ranks, int reg, uintptr_t val)
{
uint8_t ch, r;
for (ch = 0; ch < channels; ch++) {
for (r = 0; r < ranks; r++) {
amc_mrcmd_to_ch_rnk(op, ch, r, reg, val);
}
}
}
// Only send the cmd to specific channel and rank (used during calibration on H6 and later)
void amc_mrcmd_to_ch_rnk(amc_mrcmd_op_t op, uint8_t channel, uint8_t rank, int32_t reg, uintptr_t val)
{
uint32_t cmd, regval;
uint8_t *buffer = (uint8_t *) val;
if (op == MR_READ)
cmd = 0x00000011 | (reg << 8);
else
cmd = 0x00000001 | (reg << 8) | (((uint32_t)val) << 24);
*_amc_chregs[channel].mrcmd = cmd | (rank << 16);
// <rdar://problem/16239984> Alcatraz, Fiji, Capri: L2_TB: MCU PIO accesses to the same address and device stream getting reordered in CP
#if AMC_REG_VERSION > 2
platform_memory_barrier();
#endif
while(((regval = *_amc_chregs[channel].mrstatus) & _amc_chregs[channel].mrpoll) != 0) ;
if (op == MR_READ)
*buffer++ = (regval >> _amc_chregs[channel].mrshift) & 0xff;
}
void amc_enable_autorefresh(void)
{
// Configure auto-refresh. Freq0 has the auto-refresh enable, so do it last.
rAMC_AREFEN_FREQ(1) = 0x00000000 | amc_params.aref_freq1;
rAMC_AREFEN_FREQ(2) = 0x00000000;
rAMC_AREFEN_FREQ(3) = 0x00000000;
rAMC_AREFEN_FREQ(0) = 0x01011001 | amc_params.aref_freq0;
}
void amc_configure_default_address_decoding_and_mapping(void)
{
rAMC_ADDRCFG = 0x00020101; // Default: 2Gb geometry: 9col, 14row, 8bank
if (AMC_NUM_RANKS > 1)
rAMC_ADDRCFG |= 0x01000000; // 2rank
rAMC_CHNLDEC = 0x00040000 | amc_params.chnldec; // 2Gb/channel, interleaved
#if AMC_REG_VERSION < 3 && !SUB_PLATFORM_S7002
if (amc_params.chnldec2)
rAMC_CHNLDEC2 = amc_params.chnldec2;
if (amc_params.chnldec4)
rAMC_CHNLDEC4 = amc_params.chnldec4;
#endif
rAMC_ADDRMAP_MODE = 2; // RIBI2
#if AMC_REG_VERSION < 3 && !SUB_PLATFORM_S7002
if (amc_params.flags & FLAG_AMC_PARAM_MRR_BIT_SWIZZLE)
rAMC_PHYMRRDATADQBITMUX = 0x56714230;
if (amc_params.flags & FLAG_AMC_PARAM_MRR_BYTE_SWIZZLE)
rAMC_PHYMRRDATADQBYTEMUX = 0x2;
#endif
}
int32_t amc_init(bool resume)
{
uint8_t config_id = 0;
uint32_t tREFi;
uint64_t deadline;
uint32_t ch, r, i;
#if AMC_PARAMS_AP_DEV
if (target_config_dev()) {
memcpy(&amc_params, &amc_params_dev, sizeof(amc_params));
} else {
memcpy(&amc_params, &amc_params_ap, sizeof(amc_params));
}
#endif
amc_params_initialized = true;
#if (AMC_REG_VERSION == 2 && SUB_PLATFORM_S7002)
clocks_set_performance(kPerformanceMemoryLow);
#else
// Make sure we're at full memory frequency
clocks_set_performance(kPerformanceMemoryFull);
#endif
// The clock_reset_device() call takes care of the requirements in <rdar://problem/7269959>
clock_reset_device(CLK_MCU);
// Keep track of 50us after MCU reset to ensure resume timing is in spec
deadline = timer_get_ticks() + timer_usecs_to_ticks(50);
//////////////////////////////////////////////////////////
//
// 1. AMC initial configuration
//
//////////////////////////////////////////////////////////
amc_phy_enable_dqs_pulldown(false);
tREFi = amc_params.tREFi;
for (i = 0; i < AMC_FREQUENCY_SLOTS; i++) {
rAMC_CAS_FREQ(i) = amc_params.freq[i].cas;
rAMC_PCH_FREQ(i) = amc_params.freq[i].pch;
rAMC_ACT_FREQ(i) = amc_params.freq[i].act;
rAMC_AUTO_FREQ(i) = amc_params.freq[i].autoref | ((i == 0) ? tREFi : 0);
rAMC_SELF_FREQ(i) = amc_params.freq[i].selfref;
rAMC_MODE_FREQ(i) = amc_params.freq[i].modereg;
rAMC_MIFCASSCH_FREQ(i) = amc_params.freq[i].mifcassch;
}
#if (AMC_REG_VERSION == 2 && SUB_PLATFORM_S7002)
rAMC_TREFBWBASECYC_FREQ(0) = amc_params.freq[0].trefbwbasecyc;
rAMC_TREFBWBASECYC_FREQ(1) = amc_params.freq[1].trefbwbasecyc;
rAMC_TREFBWBASECYC_FREQ(2) = amc_params.freq[2].trefbwbasecyc;
#endif
rAMC_LAT = (amc_params.rdlat << 16) | (amc_params.wrlat << 8);
rAMC_PDN = amc_params.pdn;
rAMC_DERATE = amc_params.derate;
rAMC_RD = amc_params.read;
if (amc_params.flags & FLAG_AMC_PARAM_BUSTAT23) {
rAMC_BUSTAT_FREQ01 = amc_params.bustat;
rAMC_BUSTAT_FREQ23 = amc_params.bustat2;
} else {
rAMC_BUSTAT = amc_params.bustat;
}
for (ch = 0; ch < AMC_NUM_CHANNELS; ch++)
for (r = 0; r < AMC_NUM_RANKS; r++)
*(_amc_chregs[ch].rnkcfg + AMC_RNKCFG_OFFSET(r)) = 1;
rAMC_PHYRDWRTIM = (amc_params.phywrlat << 16) | (amc_params.phyrdlat << 8) | (amc_params.rdlat - 2);
rAMC_PWRMNGTEN = amc_params.pwrmngten_default;
rAMC_SCHEN = amc_params.schen_default; // disable the scheduler
rAMC_MCPHY_UPDTPARAM = amc_params.mcphyupdate;
#if (AMC_REG_VERSION == 3) || (AMC_REG_VERSION == 2 && SUB_PLATFORM_S7002)
rAMC_MCPHY_UPDTPARAM1 = amc_params.mcphyupdate1;
#endif
if (amc_params.autoref_params)
rAMC_AUTOREF_PARAMS = amc_params.autoref_params;
amc_configure_address_decoding_and_mapping();
// Enable MCUs
rAMC_AMCEN = (amc_params.flags & FLAG_AMC_PARAM_LEGACY) ? 0x80000000 : 0;
// <rdar://problem/16239984> Alcatraz, Fiji, Capri: L2_TB: MCU PIO accesses to the same address and device stream getting reordered in CP
#if AMC_REG_VERSION > 2
platform_memory_barrier();
#endif
for (ch = 0; ch < AMC_NUM_CHANNELS; ch++)
rAMC_AMCEN |= _amc_chregs[ch].mcuen;
// Enable AIU, if supported
if (amc_params.flags & FLAG_AMC_PARAM_ENABLE_AIU)
rAMC_AMCEN |= 0x10000;
//////////////////////////////////////////////////////////
//
// 2. PHY Initial Configuartions
//
//////////////////////////////////////////////////////////
#ifdef AMP_SWIZZLE
#if (AMP_SWIZZLE == AMP_SWIZZLE_PER_J34M) // per <rdar://15498696>
// Set up the MRR Bit Mapping Muxen
rAMC_PHYMRRDATADQBYTEMUX = 0x00000002;
rAMC_PHYMRRDATADQBITMUX = 0x76543210;
#endif
#endif
amc_phy_init(resume);
//////////////////////////////////////////////////////////
//
// 3. Self-Refresh and DRAM Reset
//
//////////////////////////////////////////////////////////
#if (AMC_REG_VERSION == 3) || ((AMC_REG_VERSION == 2) && SUB_PLATFORM_S7002)
rAMC_AREFPARAM = amc_params.freq[0].arefparam;
for (i = 1; i < AMC_FREQUENCY_SLOTS; i++) {
rAMC_AREFPARAM_FREQ(i) = amc_params.freq[i].arefparam;
}
#else
rAMC_AREFPARAM = 0x00060532 | amc_params.arefparam;
#endif
#if !((AMC_REG_VERSION == 2) && SUB_PLATFORM_S7002)
amc_enable_slow_boot(true);
#endif
// <rdar://problem/8082114> <rdar://problem/8222443>
// <rdar://problem/8080928> <rdar://problem/8711948>
rAMC_LONGSR = 0x00000000;
#if (AMC_REG_VERSION == 3) || ((AMC_REG_VERSION == 2) && SUB_PLATFORM_S7002)
rAMC_LONGSR = 0x01000000 | amc_params.longsrcnt | amc_params.srextrarefcnt;
#endif
if (resume) {
// Enable temperature based refresh rate modulation to compensate for missing refresh
if (amc_params.odts) {
#if SUPPORT_FPGA
rAMC_ODTS = amc_params.odts;
#else
rAMC_ODTS = 0x00010000 | amc_params.odts;
#endif
}
amc_enable_autorefresh();
// Software must guarantee that at least 50 us have passed since the de-assertion
// of AMC reset before self-refresh exit, in the resume-boot case.
while (deadline > timer_get_ticks()) ;
}
for (ch = 0; ch < AMC_NUM_CHANNELS; ch++)
*_amc_chregs[ch].initcmd = 0x00001000; // start self-refresh exit seq on ch
// <rdar://problem/16239984> Alcatraz, Fiji, Capri: L2_TB: MCU PIO accesses to the same address and device stream getting reordered in CP
#if AMC_REG_VERSION > 2
platform_memory_barrier();
#endif
for (ch = 0; ch < AMC_NUM_CHANNELS; ch++)
while (*_amc_chregs[ch].initcmd != 0) ;
#if AMC_REG_VERSION < 3 && !SUB_PLATFORM_S7002
rAMC_AREFPARAM = 0x00020532 | amc_params.arefparam;
rAMC_LONGSR = 0x05000000 | amc_params.longsrcnt | amc_params.srextrarefcnt;
#endif
//////////////////////////////////////////////////////////
//
// 4. DRAM Reset, ZQ Calibration & Configuration (cold boot only)
//
//////////////////////////////////////////////////////////
if (!resume) {
spin(200);
// MR63 (DRAM reset and auto-refresh enable)
amc_mrcmd(MR_WRITE, AMC_NUM_CHANNELS, AMC_NUM_RANKS, 0x3f, amc_params.mr63);
spin(12);
// MR10 (ZQ initial calibration)
amc_mrcmd(MR_WRITE, AMC_NUM_CHANNELS, AMC_NUM_RANKS, 0xa, 0xff);
spin(1);
// MR2 register (read/write latency, assumes legal combo in amc_params)
amc_mrcmd(MR_WRITE, AMC_NUM_CHANNELS, AMC_NUM_RANKS, 0x2, (amc_params.mr2 ? amc_params.mr2 : (amc_params.rdlat - 2)));
}
// Read device info: vendor, revision, and configuration info
// Configuration info: device width, device type, device density
// We are assuming all of our devices are identical
amc_mrcmd(MR_READ, 1, 1, 0x5, (uintptr_t)&_amc_device_info.vendor_id);
amc_mrcmd(MR_READ, 1, 1, 0x6, (uintptr_t)&_amc_device_info.rev_id);
amc_mrcmd(MR_READ, 1, 1, 0x7, (uintptr_t)&_amc_device_info.rev_id2);
amc_mrcmd(MR_READ, 1, 1, 0x8, (uintptr_t)&config_id);
if ((_amc_device_info.vendor_id == 0) || (config_id == 0))
panic("failed to read vendor-id/config-id, vid:%08x, config:%08x, rev:%08x\n", _amc_device_info.vendor_id,
config_id, _amc_device_info.rev_id);
_amc_device_info.width = (32 >> ((config_id >> JEDEC_MR8_WIDTH_SHIFT) & JEDEC_MR8_WIDTH_MASK)) >> 3;
_amc_device_info.density = ((config_id >> JEDEC_MR8_DENSITY_SHIFT) & JEDEC_MR8_DENSITY_MASK);
_amc_device_info.type = ((config_id >> JEDEC_MR8_TYPE_SHIFT) & JEDEC_MR8_TYPE_MASK);
_amc_device_info_inited = true;
dprintf(DEBUG_INFO, "sdram vendor id:0x%02x rev id:0x%02x rev id2:%02x\n",
_amc_device_info.vendor_id, _amc_device_info.rev_id, _amc_device_info.rev_id2);
dprintf(DEBUG_INFO, "sdram config: width %d/%d Mbit/type %d\n", _amc_device_info.width << 3,
64 << _amc_device_info.density, _amc_device_info.type);
if ((_amc_device_info.density < JEDEC_DENSITY_1Gb) || (_amc_device_info.density > JEDEC_DENSITY_4Gb))
panic("unsupported DRAM density: %dMbit", 64 << _amc_device_info.density);
if (!resume) {
// MR1 (nWR=pch_freq0.tWRCyc), WC=wrap, BT=Seq, BL=16)
amc_mrcmd(MR_WRITE, AMC_NUM_CHANNELS, AMC_NUM_RANKS, 0x1,
(amc_params.mr1 ? amc_params.mr1 :
(((amc_params.freq[0].pch - 0x200) & 0xf00) >> 3) | 0x04));
// MR3 register (output buffer drive strength 48-Ohm unless overridden)
amc_mrcmd(MR_WRITE, AMC_NUM_CHANNELS, AMC_NUM_RANKS, 0x3, (amc_params.mr3 ? amc_params.mr3 : 0x3));
}
// DRAM vendor-specific workarounds
amc_dram_workarounds(resume);
//////////////////////////////////////////////////////////
//
// 5. Topology-specific AMC re-configuration
//
//////////////////////////////////////////////////////////
if (amc_params.flags & FLAG_AMC_PARAM_RECONFIG) {
uint8_t num_banks;
num_banks = 8;
if (((_amc_device_info.type == JEDEC_TYPE_S4_SDRAM) && (_amc_device_info.density <= JEDEC_DENSITY_512Mb)) ||
((_amc_device_info.type == JEDEC_TYPE_S2_SDRAM) && (_amc_device_info.density <= JEDEC_DENSITY_2Gb)))
num_banks = 4;
if (_amc_device_info.density == JEDEC_DENSITY_1Gb) {
if (_amc_device_info.type == JEDEC_TYPE_S4_SDRAM)
rAMC_AUTO_FREQ(0) = amc_params.freq[0].autoref | amc_params.tREFi_1Gb;
rAMC_LONGSR = 0x05010000 | amc_params.longsrcnt_1Gb | amc_params.srextrarefcnt;
if ((AMC_NUM_RANKS == 1) && (num_banks == 8)) {
rAMC_CHNLDEC &= ~(7 << 16);
rAMC_CHNLDEC |= 0x00030000; // 1Gb/channel, interleaved
rAMC_ADDRCFG = 0x00010101;
}
}
else if (_amc_device_info.density == JEDEC_DENSITY_4Gb) {
if ((AMC_NUM_RANKS == 1) && (num_banks == 8)) {
rAMC_CHNLDEC &= ~(7 << 16);
rAMC_CHNLDEC |= 0x00050000; // 4Gb/channel, interleaved
rAMC_ADDRCFG = 0x00020201;
}
}
if (AMC_NUM_CHANNELS == 1) {
switch(_amc_device_info.density) {
case JEDEC_DENSITY_2Gb:
rAMC_CHNLDEC |= 0x00000001; // 2Gb/channel, stacked
break;
case JEDEC_DENSITY_4Gb:
rAMC_CHNLDEC &= ~(7 << 16);
rAMC_CHNLDEC |= 0x00050001; // 4Gb/channel, stacked
break;
case JEDEC_DENSITY_1Gb:
rAMC_CHNLDEC &= ~(7 << 16);
rAMC_CHNLDEC |= 0x00030001; // 1Gb/channel, stacked
break;
}
}
}
// For Alcatraz and later, we can configure the total memory size register dynamically
#if AMC_REG_VERSION > 2
uint32_t device_size_Mbits = 64 << _amc_device_info.density;
uint32_t total_size_Mbytes = (AMC_NUM_CHANNELS * AMC_NUM_RANKS * device_size_Mbits) >> 3;
// Units of 128 MBs in the register
rMCC_DRAMACCCTRL = (total_size_Mbytes >> 7) - 1;
dprintf(DEBUG_INFO, "rMCC_DRAMACCCTRL: 0x%08x, memory_size: %u bytes\n", rMCC_DRAMACCCTRL, (total_size_Mbytes << 20));
#endif
if (amc_params.flags & FLAG_AMC_PARAM_ZQCL) {
if (resume) {
uint8_t temp;
rAMC_ZQC = 0x00090000;
amc_mrcmd(MR_WRITE, AMC_NUM_CHANNELS, AMC_NUM_RANKS, 0xa, 0xab);
spin(1);
rAMC_ZQC = 0x00080000;
// MR4 read to bring memory out of self-refresh
amc_mrcmd(MR_READ, AMC_NUM_CHANNELS, AMC_NUM_RANKS, 0x4, (uintptr_t)&temp);
}
// Wait 5 us before freq change to make sure all refreshes have been flushed
spin(5);
}
//////////////////////////////////////////////////////////
//
// 6. Switch from boot-clock speed to normal speed
//
//////////////////////////////////////////////////////////
#if !SUPPORT_FPGA
// Only enable AutoSR on pre-H6 devices
#if AMC_REG_VERSION < 3 && !SUB_PLATFORM_S7002
rAMC_PWRMNGTEN |= 0x00000010;
#endif
#endif // !SUPPORT_FPGA
rAMC_SCHEN = amc_params.schen_default | 0x1; // enable the scheduler
amc_enable_slow_boot(false);
amc_phy_enable_dqs_pulldown(true);
//////////////////////////////////////////////////////////
//
// 7. PHY DQ and address timing calibration
//
//////////////////////////////////////////////////////////
#if !SUPPORT_FPGA
rAMC_READ_LEVELING = amc_params.readleveling;
#endif // !SUPPORT_FPGA
amc_phy_calibration_ca_rddq_cal(resume);
//////////////////////////////////////////////////////////
//
// 8. Enable power saving and other features, and turn on AMC scheduler
//
//////////////////////////////////////////////////////////
amc_finalize(resume);
amc_phy_finalize();
#if AMC_REG_VERSION < 3 && !SUB_PLATFORM_S7002
// Program tunables
for (i = 0; i < sizeof(amc_tunables) / sizeof(amc_tunables[0]); i++) {
if (amc_tunables[i].reg == 0)
break;
*amc_tunables[i].reg = amc_tunables[i].value;
}
#endif
//////////////////////////////////////////////////////////
//
// 9. PHY write DQ calibration
//
//////////////////////////////////////////////////////////
amc_phy_calibration_wrdq_cal(resume);
#if (AMC_REG_VERSION == 3) || ((AMC_REG_VERSION == 2) && SUB_PLATFORM_S7002)
// <rdar://problem/13752969> requires moving MR4 from step 8 to after wrdqcal
if (!resume) {
// MR4 to bring memory out of self-refresh
uint8_t odts;
amc_mrcmd(MR_READ, AMC_NUM_CHANNELS, AMC_NUM_RANKS, 0x4, (uintptr_t)&odts);
}
// Program tunables after wrdqcal for H6
for (i = 0; i < sizeof(amc_tunables) / sizeof(amc_tunables[0]); i++) {
if (amc_tunables[i].reg == 0)
break;
*amc_tunables[i].reg = amc_tunables[i].value;
}
#endif
// cache memory info for later
platform_set_memory_info(_amc_device_info.vendor_id, amc_get_memory_size());
return 0;
}
void mcu_late_init(void)
{
}
uint64_t amc_get_memory_size(void)
{
// if memory is not inited, density is unknown, spin here ...
if (false == _amc_device_info_inited)
for(;;) ;
// device density (in MBytes) * num of channels * num of ranks
return ((8 << _amc_device_info.density) * AMC_NUM_CHANNELS * AMC_NUM_RANKS);
}
const struct amc_memory_device_info *amc_get_memory_device_info(void)
{
// if memory is not inited, device info is unknown, spin here ...
if (false == _amc_device_info_inited)
for(;;) ;
return ((const struct amc_memory_device_info *)&_amc_device_info);
}
const struct amc_param *amc_get_params(void)
{
ASSERT(amc_params_initialized);
return &amc_params;
}
void amc_scheduler_en_workaround(bool init)
{
if (init) {
uint8_t temp[AMC_NUM_CHANNELS];
rAMC_PWRMNGTEN = 0x00000000;
amc_mrcmd(MR_READ, AMC_NUM_CHANNELS, 1, 0x4, (uintptr_t)temp);
} else {
rAMC_PWRMNGTEN = 0x00000010;
}
}
// H6 and M7 specific routine used during dynamic calibration
#if (AMC_REG_VERSION == 3) || ((AMC_REG_VERSION == 2) && SUB_PLATFORM_S7002)
// returns 1 if number of 1s in input is odd, otherwise returns 0
static uint32_t amc_odd_parity(uint32_t input)
{
uint32_t output = input;
output = (output & 0x0000ffff) ^ (output >> 16);
output = (output & 0x000000ff) ^ (output >> 8);
output = (output & 0x0000000f) ^ (output >> 4);
output = (output & 0x00000003) ^ (output >> 2);
output = (output & 0x00000001) ^ (output >> 1);
return output;
}
// Given ch, rnk, bank, row, and col, compute the Apple Fabric address that CPU can use to do reads/writes
// For details of addr mapping, see "Address_Unamp.xls" at
// https://seg-fijipublic.ecs.apple.com/doc/release/index.php?dir=/reference/org-seg-services-vhost-seg--fijipublic.ecs.apple.com/content/doc/release/specs/Apple_IP/AMC
addr_t amc_get_uncached_dram_virt_addr(uint32_t ch, uint32_t rnk, uint32_t bank, uint32_t row, uint32_t col)
{
addr_t system_addr;
uint32_t ch_dropped_addr, ch_inserted_val;
uint32_t col_val;
uint32_t rank_off, bank_off, row_off, col_off;
uint32_t temp_bank_bit2, temp_bank_bit1, temp_bank_bit0;
uint32_t rank_wid, bank_wid, row_wid, col_wid;
uint32_t addrcfg = rAMC_ADDRCFG;
uint32_t ch_insert_point, ch_insert_width, ch_insert_mask;
uint32_t addrmapmode = rAMC_ADDRMAP_MODE;
#if AMC_REG_VERSION < 3
uint32_t addrbankhash0 = rAMC_AIU_ADDRBANKHASH0;
uint32_t addrbankhash1 = rAMC_AIU_ADDRBANKHASH1;
uint32_t addrbankhash2 = rAMC_AIU_ADDRBANKHASH2;
#else
uint32_t addrbankhash0 = rAMC_MCSADDRBNKHASH(0);
uint32_t addrbankhash1 = rAMC_MCSADDRBNKHASH(1);
uint32_t addrbankhash2 = rAMC_MCSADDRBNKHASH(2);
#endif
uint32_t chnldec = rAMC_CHNLDEC;
uint32_t amcen = rAMC_AMCEN;
#if AMC_REG_VERSION < 3
uint32_t temp_ch_bit0, temp_ch_bit1;
bool h4p_legacy_mode = amcen & 0x80000000;
#endif
system_addr = SDRAM_BASE_UNCACHED;
/*
DRAM Address Mapping Mode (H6 and M7 uses RIBI2)
RSBS: 0 Rank Stacked, Bank Stacked. {CS, BA, RA, CA}
RIBI1: 1 Rank Interleaved, Bank Interleaved, Option 1. {RA, CA-high, CS, BA, CA-low(128B)}
RIBI2: 2 Rank Interleaved, Bank Interleaved, Option 2. {RA, CS, BA, CA}
RSBI1: 3 Rank Stacked, Bank Interleaved, Option 1. {CS, RA, CA-high, BA, CA-low(128B)}
RIBI3: 4 Rank Interleaved, Bank Interleaved, Option 3. {RA, CS, CA-high, BA, CA-low(128B)}
*/
/*
BnkAddrWid
2-bits: 0
3-bits: 1 (H6)
ColAddrWid
8-bits: 0
9-bits: 1
10-bits: 2 (H6)
11-bits: 3
RowAddrWid
12-bits: 0
13-bits: 1
14-bits: 2 (H6)
15-bits: 3
CsWid
0-bits: 0 (N51)
1-bits: 1 (J71)
*/
// whether rank needs a bit depends on ADDRCFG.CSWID bit
rank_wid = ((addrcfg >> 24) & 1);
// rest of the bit widths also depend on ADDRCFG fields
bank_wid = (addrcfg & 1) + 2;
row_wid = ((addrcfg >> 16) & 0x3) + 12;
col_wid = ((addrcfg >> 8) & 0x3) + 8;
// column bits always start at bit 2 (each [row, col] specifies 4 bytes)
col_off = 2;
// these are used in addressing modes 1, 3, and 4
uint32_t col_low_bits = 5; // 128B - 2
uint32_t col_low_mask = (1 << col_low_bits) - 1;
switch(addrmapmode)
{
case 0:
col_val = col;
row_off = col_off + col_wid;
bank_off = row_off + row_wid;
rank_off = bank_off + bank_wid;
break;
case 1:
col_val = ((col & ~col_low_mask) << (rank_wid + bank_wid)) | (col & col_low_mask);
bank_off = col_off + col_low_bits;
rank_off = bank_off + bank_wid;
row_off = col_off + col_wid + bank_wid + rank_wid; // slightly different due to col split
break;
default:
case 2:
// RIBI2 (H6)
col_val = col;
bank_off = col_off + col_wid;
rank_off = bank_off + bank_wid;
row_off = rank_off + rank_wid;
break;
case 3:
col_val = ((col & ~col_low_mask) << bank_wid) | (col & col_low_mask);
bank_off = col_off + col_low_bits;
row_off = col_off + col_wid + bank_wid; // slightly different due to col split
rank_off = row_off + row_wid;
break;
case 4:
col_val = ((col & ~col_low_mask) << bank_wid) | (col & col_low_mask);
bank_off = col_off + col_low_bits;
rank_off = col_off + col_wid + bank_wid; // slightly different due to col split
row_off = rank_off + rank_wid;
break;
}
// bank hashing
//
temp_bank_bit2 = amc_odd_parity(row & ~addrbankhash2);
temp_bank_bit1 = amc_odd_parity(row & ~addrbankhash1);
temp_bank_bit0 = amc_odd_parity(row & ~addrbankhash0);
bank = bank ^ ((temp_bank_bit2 << 2) | (temp_bank_bit1 << 1) | temp_bank_bit0);
// our address so far - only the channel num stuff is missing now
//
ch_dropped_addr = (rnk << rank_off) | (bank << bank_off) | (row << row_off) | (col_val << col_off);
/*
ChSelTyp
Interleaving: 0 (H6)
Stacked: 1
*/
if (chnldec & 1) {
// in stacked mode, ch will be inserted at bit 29 for H6
ch_inserted_val = ch_dropped_addr | (ch << (((chnldec >> 16) & 0x7) + 24));
}
else { // interleaving
#if AMC_REG_VERSION < 3
if (h4p_legacy_mode) {
switch((chnldec >> 8) & 0xf) {
case (1 << 0):
ch_insert_point = 6;
break;
case (1 << 1):
ch_insert_point = 8;
break;
case (1 << 2):
ch_insert_point = 10;
break;
case (1 << 3):
ch_insert_point = 12;
break;
default:
panic("AMC CHNLDEC is not programmed correctly\n");
}
}
else
#endif
{
// ch is inserted at bit 6 for interleaving
ch_insert_point = 6;
}
// ch insertion width ( 1 or 0 bits) depends on whether more than 1 channel is enabled
ch_insert_width = (amcen >> 8) & 1;
ch_insert_width += (amcen >> 12) & 1;
// now fix the address so we can reconstruct the XOR
ch_insert_mask = (1 << ch_insert_point) - 1;
ch_dropped_addr = ((ch_dropped_addr & ~ch_insert_mask) << ch_insert_width) | (ch_dropped_addr & ch_insert_mask);
// calculate the XOR value - XOR all the bits
ch_inserted_val = ch;
#if AMC_REG_VERSION < 3
if (h4p_legacy_mode) {
switch((chnldec >> 8) & 0xf) {
case (1 << 0):
ch_inserted_val ^= (ch_dropped_addr >> 6);
break;
case (1 << 1):
ch_inserted_val ^= (ch_dropped_addr >> 8);
break;
case (1 << 2):
ch_inserted_val ^= (ch_dropped_addr >> 10);
break;
case (1 << 3):
ch_inserted_val ^= (ch_dropped_addr >> 12);
break;
}
}
else {
temp_ch_bit0 = amc_odd_parity(ch_inserted_val & (rAMC_CHNLDEC2 & 0x3ffffff));
temp_ch_bit1 = amc_odd_parity(ch_inserted_val & (rAMC_CHNLDEC4 & 0x3ffffff));
ch_inserted_val = (temp_ch_bit1 << 1) | temp_ch_bit0;
}
#else
ch_inserted_val |= (ch_dropped_addr >> ch_insert_point);
ch_inserted_val = amc_odd_parity(ch_inserted_val & rMCC_MCUCHNHASH);
#endif
// finally, insert the XOR bits
ch_insert_mask = (1 << ch_insert_width) - 1; // reuse this var in a pseudo-related way
ch_inserted_val = ch_dropped_addr | ((ch_inserted_val & ch_insert_mask) << ch_insert_point);
}
system_addr += (addr_t) ch_inserted_val;
return system_addr;
}
#endif // AMC_REG_VERSION > 2
Reference in New Issue View Git Blame Copy Permalink