1088 lines
39 KiB
C
1088 lines
39 KiB
C
/*
|
|
* Copyright (C) 2010-2014 Apple Inc. All rights reserved.
|
|
*
|
|
* This document is the property of Apple Inc.
|
|
* It is considered confidential and proprietary.
|
|
*
|
|
* This document may not be reproduced or transmitted in any form,
|
|
* in whole or in part, without the express written permission of
|
|
* Apple Inc.
|
|
*/
|
|
#include <debug.h>
|
|
#include <drivers/power.h>
|
|
#include <platform.h>
|
|
#include <platform/clocks.h>
|
|
#include <platform/gpio.h>
|
|
#include <platform/gpiodef.h>
|
|
#include <platform/power.h>
|
|
#include <platform/timer.h>
|
|
#include <platform/soc/chipid.h>
|
|
#include <platform/soc/hwclocks.h>
|
|
#include <platform/soc/miu.h>
|
|
#include <platform/soc/pmgr.h>
|
|
#include <sys/boot.h>
|
|
#include <target.h>
|
|
|
|
#if !APPLICATION_EMBEDDEDIOP
|
|
|
|
#define PLL_VCO_TARGET(pllx) (2ULL * pllx##_O * pllx##_M / pllx##_P)
|
|
#define PLL_FREQ_TARGET(pllx) (2ULL * pllx##_O * pllx##_M / pllx##_P / (1 << pllx##_S))
|
|
|
|
static u_int32_t clk_divs_bypass[PMGR_CLK_CFG_COUNT] = {
|
|
0x80008421, 0x80000000, 0x80000000, 0x80000001, // cpu, mcu_fixed, mcu, pclk1
|
|
0x80000001, 0x80000001, 0x80000001, 0x80000001, // prediv0, prediv1, prediv2, prediv3
|
|
0x80000001, 0x80000001, 0x80000001, 0x80000000, // prediv4, prediv5, prediv6, managed0
|
|
0x80000000, 0x80000000, 0x80000000, 0x80000000, // managed1, managed2, managed3, managed4
|
|
0x80000000, 0x80000000, 0x80000001, 0x80000001, // managed5, aes_core, vid1, medium0
|
|
0x80000001, 0xB0000001, 0x80000001, 0x80000001, // vid0, i2c, sdio, audio
|
|
0x80000001, 0x80000001, 0x80000001, 0x80000001, // hpark_pclk0, hpark_tclk, uperf, debug
|
|
0x80000001, 0x80000001, 0x80000001, 0x80000001, // hperf_rt, gfx, gfx_slc, hperf_nrt
|
|
0x80000001, 0x80000001, 0x80000001, 0x80000001, // isp, iop, cdio, lperfs,
|
|
0x80000001, 0x80000001, 0x80000001, 0x80000001, // pclk0, pclk2, pclk3, medium1
|
|
0x80000001, 0x80000001, 0x80000001, 0x80000001, // spi0, spi1, spi2, spi3,
|
|
0x80000001, 0x80000021, 0x80000001, 0x80000001, // spi4, sleep, usbphy, usbphy1
|
|
0x80000001, 0x80000001, 0x80000001, 0x80000001, // usbohci, usb12, nco_ref0, nco_ref1
|
|
0x80000001, 0x80000001, 0x80000000, 0x80000001, // nco_ref2, venc_mtx, venc, slv_bus
|
|
};
|
|
|
|
static u_int32_t perf_state_bypass[3] = {
|
|
0x01010101, 0x03010101, 0x00010101, // defaults, slow mcu_cfg
|
|
};
|
|
struct perf_info {
|
|
u_int8_t perf_state;
|
|
u_int8_t perf_div;
|
|
};
|
|
|
|
#if APPLICATION_IBOOT
|
|
|
|
#ifndef TARGET_PREDIV6_DIV
|
|
#define TARGET_PREDIV6_DIV 5
|
|
#endif
|
|
|
|
#ifndef TARGET_VID0_DIV
|
|
#define TARGET_VID0_DIV 1
|
|
#endif
|
|
|
|
#define PLL0 0
|
|
#define PLL0_O OSC_FREQ
|
|
#define PLL0_P 6
|
|
#define PLL0_M 250
|
|
#define PLL0_S 1
|
|
#define PLL0_V PLL_VCO_TARGET(PLL0)
|
|
#define PLL0_T PLL_FREQ_TARGET(PLL0)
|
|
|
|
#define PLL1 1
|
|
#define PLL1_O OSC_FREQ
|
|
#define PLL1_P 6
|
|
#define PLL1_M 200
|
|
#define PLL1_S 1
|
|
#define PLL1_V PLL_VCO_TARGET(PLL1)
|
|
#define PLL1_T PLL_FREQ_TARGET(PLL1)
|
|
|
|
#define PLL2 2
|
|
#define PLL2_O OSC_FREQ
|
|
#define PLL2_P 6
|
|
#define PLL2_M 200
|
|
#define PLL2_S 2
|
|
#define PLL2_V PLL_VCO_TARGET(PLL2)
|
|
#define PLL2_T PLL_FREQ_TARGET(PLL2)
|
|
|
|
#define PLL3 3
|
|
#define PLL3_O OSC_FREQ
|
|
#define PLL3_P 4
|
|
#define PLL3_M 171
|
|
#define PLL3_S 1
|
|
#define PLL3_V PLL_VCO_TARGET(PLL3)
|
|
#define PLL3_T PLL_FREQ_TARGET(PLL3)
|
|
|
|
// PLL4 not used on H4G
|
|
|
|
#define PLL5 5
|
|
#define PLL5_O OSC_FREQ
|
|
#define PLL5_P 4
|
|
#define PLL5_M 100
|
|
#define PLL5_S 1
|
|
#define PLL5_V PLL_VCO_TARGET(PLL5)
|
|
#define PLL5_T PLL_FREQ_TARGET(PLL5)
|
|
|
|
#define PLLUSB 6
|
|
#define PLLUSB_O OSC_FREQ
|
|
#define PLLUSB_P 4
|
|
#define PLLUSB_M 160
|
|
#define PLLUSB_S 2
|
|
#define PLLUSB_V PLL_VCO_TARGET(PLLUSB)
|
|
#define PLLUSB_T PLL_FREQ_TARGET(PLLUSB)
|
|
|
|
#define D_PREDIV6 (0xA0000000 | TARGET_PREDIV6_DIV)
|
|
#define D_VID0 (0xB0000000 | TARGET_VID0_DIV)
|
|
|
|
static u_int32_t clk_divs_active[PMGR_CLK_CFG_COUNT] = {
|
|
0x90011041, 0x80000001, 0x80000001, 0x90000002, // cpu, mcu_fixed, mcu, pclk1
|
|
0xA0000005, 0xA0000002, 0xA0000003, 0x00000000, // prediv0, prediv1, prediv2, prediv3
|
|
0x90000001, 0x00000000, D_PREDIV6, 0x80000000, // prediv4, prediv5, prediv6, managed0
|
|
0x00000000, 0x80000000, 0x80000000, 0x80000000, // managed1, managed2, managed3, managed4
|
|
0x80000000, 0x80000000, 0xA0000013, 0x80000004, // managed5, aes_core, vid1, medium0
|
|
D_VID0, 0x80000008, 0x80000004, 0xA0000002, // vid0, i2c, sdio, audio
|
|
0x90000004, 0xA0000002, 0xA0000007, 0x80000008, // hpark_pclk0, hpark_tclk, uperf, debug
|
|
0xB0000001, 0x80000001, 0xB0000001, 0xA0000001, // hperf_rt, gfx, gfx_slc, hperf_nrt
|
|
0xA0000001, 0xB0000001, 0xB0000001, 0xB0000002, // isp, iop, cdio, lperfs
|
|
0x80000001, 0x80000001, 0x80000001, 0x8000000A, // pclk0, pclk2, pclk3, medium1
|
|
0xB0000001, 0xB0000001, 0x80000001, 0xB0000001, // spi0, spi1, spi2, spi3
|
|
0xB0000001, 0x80000314, 0x80000001, 0x80000001, // spi4, sleep, usbphy, usbphy1
|
|
0x80000001, 0x80000002, 0xA0000001, 0xB0000001, // usbohci, usb12, nco_ref0, nco_ref1
|
|
0x00000000, 0xA0000002, 0x80000002, 0xA0000002 // nco_ref2, venc_mtx, venc, slv_bus
|
|
};
|
|
|
|
#define PLL_GATES_ACTIVE (0)
|
|
|
|
static struct perf_info perf_levels[] = {
|
|
[kPerformanceHigh] = { kPERF_STATE_IBOOT+0, 1 },
|
|
[kPerformanceMedium] = { kPERF_STATE_IBOOT+1, 2 },
|
|
[kPerformanceLow] = { kPERF_STATE_IBOOT+2, 4 },
|
|
[kPerformanceMemory] = { kPERF_STATE_IBOOT+4, 4 },
|
|
};
|
|
|
|
#define PERF_STATE_ACTIVE kPERF_STATE_IBOOT
|
|
#if SUPPORT_FPGA
|
|
// mcu_cfg=3, mcu_clk and mcu_fixed_clk always divide by 1
|
|
static u_int32_t perf_state_active[kPERF_STATE_IBOOT_CNT*3] = {
|
|
0x01010022, 0x03210142, 0x00214142, // divide by 1
|
|
0x02010023, 0x03210143, 0x00214142, // divide by 2
|
|
0x04010023, 0x03210143, 0x00214142, // divide by 4
|
|
0x1f010023, 0x03210143, 0x00214142, // DPSM divider
|
|
0x04010023, 0x03210143, 0x00214142, // divide by 4
|
|
};
|
|
#else
|
|
// For rdar://9188170 : we must avoid MCU clock transitions. Lock the MCU to max speed.
|
|
static u_int32_t perf_state_active[kPERF_STATE_IBOOT_CNT*3] = {
|
|
0x01010022, 0x00210142, 0x00214142, // divide by 1, mcu_cfg=0
|
|
0x01010023, 0x00210143, 0x00214142, // divide by 2, mcu_cfg=0
|
|
0x04010023, 0x00210143, 0x00214142, // divide by 4, mcu_cfg=0
|
|
0x1f010023, 0x00210143, 0x00214142, // DPSM divider, mcu_cfg=0
|
|
0x04010023, 0x00210143, 0x00214142, // divide by 4, mcu_cfg=0
|
|
};
|
|
#endif
|
|
|
|
#endif // APPLICATION_IBOOT
|
|
|
|
#if APPLICATION_SECUREROM
|
|
|
|
#define PLL0 0
|
|
#define PLL0_O OSC_FREQ
|
|
#define PLL0_P 6
|
|
#define PLL0_M 175
|
|
#define PLL0_S 2
|
|
#define PLL0_V PLL_VCO_TARGET(PLL0)
|
|
#define PLL0_T PLL_FREQ_TARGET(PLL0)
|
|
|
|
#define PLL3 3
|
|
#define PLL3_O OSC_FREQ
|
|
#define PLL3_P 4
|
|
#define PLL3_M 171
|
|
#define PLL3_S 3
|
|
#define PLL3_V PLL_VCO_TARGET(PLL3)
|
|
#define PLL3_T PLL_FREQ_TARGET(PLL3)
|
|
|
|
static u_int32_t clk_divs_active[PMGR_CLK_CFG_COUNT] = {
|
|
0x90021041, 0x80000000, 0x80000000, 0xA0000003, // cpu, mcu_fixed, mcu, pclk1
|
|
0xA0000001, 0x00000000, 0x00000000, 0x00000000, // prediv0, prediv1, prediv2, prediv3
|
|
0x00000000, 0x00000000, 0x00000000, 0x80000000, // prediv4, prediv5, prediv6, managed0
|
|
0x00000000, 0x00000000, 0x00000000, 0x00000000, // managed1, managed2, managed3, managed4
|
|
0x00000000, 0x80000000, 0x00000000, 0x00000000, // managed5, aes_core, vid1, medium0
|
|
0x00000000, 0x00000000, 0x00000000, 0x80000002, // vid0, i2c, sdio, audio
|
|
0x00000000, 0x00000000, 0x80000008, 0x80000008, // hpark_pclk0, hpark_tclk, uperf, debug
|
|
0x00000000, 0x00000000, 0x00000000, 0x00000000, // hperf_rt, gfx, gfx_slc, hperf_nrt
|
|
0x00000000, 0x00000000, 0x80000001, 0x80000001, // isp, iop, cdio, lperfs
|
|
0x80000001, 0x80000001, 0x80000001, 0x00000000, // pclk0, pclk2, pclk3, medium1
|
|
0xB0000001, 0x80000001, 0x80000001, 0xB0000001, // spi0, spi1, spi2, spi3
|
|
0x80000001, 0x80000314, 0x00000000, 0x00000000, // spi4, sleep, usbphy, usbphy1
|
|
0x00000000, 0x00000000, 0x00000000, 0x00000000, // usbohci, usb12, nco_ref0, nco_ref1
|
|
0x00000000, 0x00000000, 0x00000000, 0x00000000 // nco_ref2, venc_mtx, venc, slv_bus
|
|
};
|
|
|
|
#define PLL_GATES_ACTIVE (0)
|
|
|
|
#define PERF_STATE_ACTIVE kPERF_STATE_SECUREROM
|
|
// For rdar://9188170 : we must avoid MCU clock transitions. Bear this in mind if additional
|
|
// perf_states are defined.
|
|
static u_int32_t perf_state_active[3] = {
|
|
0x00000004, 0x03010100, 0x00040000, // managed3-0, slow mcu_cfg, aes_core
|
|
};
|
|
|
|
static struct perf_info perf_levels[] = {
|
|
[kPerformanceHigh] = { kPERF_STATE_SECUREROM, 1 },
|
|
[kPerformanceMedium] = { kPERF_STATE_SECUREROM, 1 },
|
|
[kPerformanceLow] = { kPERF_STATE_SECUREROM, 1 },
|
|
[kPerformanceMemory] = { kPERF_STATE_SECUREROM, 1 },
|
|
};
|
|
|
|
#endif // APPLICATION_SECUREROM
|
|
|
|
/* current clock speeds */
|
|
static u_int32_t clks[PMGR_CLK_COUNT];
|
|
static u_int32_t *plls = &clks[PMGR_CLK_PLL0];
|
|
static u_int32_t perf_level;
|
|
static u_int32_t perf_div;
|
|
|
|
struct clk_parent {
|
|
volatile u_int32_t *divider_reg;
|
|
u_int32_t divider_slot;
|
|
u_int8_t parents[4];
|
|
};
|
|
|
|
/* Based on PMGR 1.16 */
|
|
static const struct clk_parent clk_parents[PMGR_CLK_COUNT] = {
|
|
[PMGR_CLK_OSC] = { 0, 0, { 0, 0, 0, 0 } },
|
|
[PMGR_CLK_PLL0] = { 0, 0, { 0, 0, 0, 0 } },
|
|
[PMGR_CLK_PLL1] = { 0, 0, { 0, 0, 0, 0 } },
|
|
[PMGR_CLK_PLL2] = { 0, 0, { 0, 0, 0, 0 } },
|
|
[PMGR_CLK_PLL3] = { 0, 0, { 0, 0, 0, 0 } },
|
|
[PMGR_CLK_PLL4] = { 0, 0, { 0, 0, 0, 0 } },
|
|
[PMGR_CLK_PLL5] = { 0, 0, { 0, 0, 0, 0 } },
|
|
[PMGR_CLK_PLLUSB] = { 0, 0, { 0, 0, 0, 0 } },
|
|
[PMGR_CLK_DOUBLER] = { &rPMGR_DOUBLER_CTL, 0, { PMGR_CLK_OSC, 0, 0, 0 } },
|
|
[PMGR_CLK_CPU] = { &rPMGR_CPU_CLK_CFG, 1, { PMGR_CLK_OSC, PMGR_CLK_PLL0, PMGR_CLK_PLL1, 0 } },
|
|
[PMGR_CLK_MEM] = { &rPMGR_CPU_CLK_CFG, 2, { PMGR_CLK_CPU, PMGR_CLK_CPU, PMGR_CLK_CPU, PMGR_CLK_CPU } },
|
|
[PMGR_CLK_PIO] = { &rPMGR_CPU_CLK_CFG, 3, { PMGR_CLK_CPU, PMGR_CLK_CPU, PMGR_CLK_CPU, PMGR_CLK_CPU } },
|
|
[PMGR_CLK_ACP] = { &rPMGR_CPU_CLK_CFG, 4, { PMGR_CLK_CPU, PMGR_CLK_CPU, PMGR_CLK_CPU, PMGR_CLK_CPU } },
|
|
[PMGR_CLK_MCU_FIXED] = { &rPMGR_MCU_FIXED_CLK_CFG, 1, { PMGR_CLK_OSC, PMGR_CLK_PLL2, PMGR_CLK_PLL3, PMGR_CLK_PLL5 } },
|
|
[PMGR_CLK_MCU] = { &rPMGR_MCU_CLK_CFG, 1, { PMGR_CLK_MCU_FIXED, 0, 0, 0 } },
|
|
[PMGR_CLK_PREDIV0] = { &rPMGR_PREDIV0_CLK_CFG, 1, { PMGR_CLK_OSC, PMGR_CLK_PLL2, PMGR_CLK_PLL3, PMGR_CLK_PLL5 } },
|
|
[PMGR_CLK_PREDIV1] = { &rPMGR_PREDIV1_CLK_CFG, 1, { PMGR_CLK_OSC, PMGR_CLK_PLL2, PMGR_CLK_PLL3, PMGR_CLK_PLL5 } },
|
|
[PMGR_CLK_PREDIV2] = { &rPMGR_PREDIV2_CLK_CFG, 1, { PMGR_CLK_OSC, PMGR_CLK_PLL2, PMGR_CLK_PLL3, PMGR_CLK_PLL5 } },
|
|
[PMGR_CLK_PREDIV3] = { &rPMGR_PREDIV3_CLK_CFG, 1, { PMGR_CLK_OSC, PMGR_CLK_PLL2, PMGR_CLK_PLL3, PMGR_CLK_PLL5 } },
|
|
[PMGR_CLK_PREDIV4] = { &rPMGR_PREDIV4_CLK_CFG, 1, { PMGR_CLK_OSC, PMGR_CLK_PLL5, PMGR_CLK_PLL3, PMGR_CLK_PLL4 } },
|
|
[PMGR_CLK_PREDIV5] = { &rPMGR_PREDIV5_CLK_CFG, 1, { PMGR_CLK_OSC, PMGR_CLK_PLL2, PMGR_CLK_PLL3, PMGR_CLK_PLL4 } },
|
|
[PMGR_CLK_PREDIV6] = { &rPMGR_PREDIV6_CLK_CFG, 1, { PMGR_CLK_OSC, PMGR_CLK_PLL2, PMGR_CLK_PLL3, PMGR_CLK_PLL5 } },
|
|
[PMGR_CLK_MANAGED0] = { &rPMGR_MANAGED0_CLK_CFG, 1, { PMGR_CLK_PREDIV0, PMGR_CLK_PREDIV1, PMGR_CLK_PREDIV4, PMGR_CLK_PREDIV5 } },
|
|
[PMGR_CLK_MANAGED1] = { &rPMGR_MANAGED1_CLK_CFG, 1, { PMGR_CLK_PREDIV0, PMGR_CLK_PREDIV1, PMGR_CLK_PREDIV2, PMGR_CLK_PREDIV5 } },
|
|
[PMGR_CLK_MANAGED2] = { &rPMGR_MANAGED2_CLK_CFG, 1, { PMGR_CLK_PREDIV0, PMGR_CLK_PREDIV1, PMGR_CLK_PREDIV2, PMGR_CLK_PREDIV3 } },
|
|
[PMGR_CLK_MANAGED3] = { &rPMGR_MANAGED3_CLK_CFG, 1, { PMGR_CLK_PREDIV0, PMGR_CLK_PREDIV1, PMGR_CLK_PREDIV2, PMGR_CLK_PREDIV3 } },
|
|
[PMGR_CLK_MANAGED4] = { &rPMGR_MANAGED4_CLK_CFG, 1, { PMGR_CLK_PREDIV0, PMGR_CLK_PREDIV1, PMGR_CLK_PREDIV4, PMGR_CLK_PREDIV5 } },
|
|
[PMGR_CLK_MANAGED5] = { &rPMGR_MANAGED5_CLK_CFG, 1, { PMGR_CLK_PREDIV0, PMGR_CLK_PREDIV4, PMGR_CLK_PREDIV2, PMGR_CLK_PREDIV3 } },
|
|
[PMGR_CLK_AES_CORE] = { &rPMGR_AES_CORE_CLK_CFG, 1, { PMGR_CLK_PREDIV0, PMGR_CLK_PLL2, PMGR_CLK_PREDIV2, PMGR_CLK_PREDIV3 } },
|
|
[PMGR_CLK_MEDIUM0] = { &rPMGR_MEDIUM0_CLK_CFG, 1, { PMGR_CLK_PREDIV0, PMGR_CLK_PREDIV1, PMGR_CLK_PREDIV2, PMGR_CLK_PREDIV3 } },
|
|
[PMGR_CLK_MEDIUM1] = { &rPMGR_MEDIUM1_CLK_CFG, 1, { PMGR_CLK_PLLUSB, 0, 0, 0 } },
|
|
[PMGR_CLK_VID0] = { &rPMGR_VID0_CLK_CFG, 1, { PMGR_CLK_PREDIV0, PMGR_CLK_PREDIV1, PMGR_CLK_PREDIV2, PMGR_CLK_PREDIV6 } },
|
|
[PMGR_CLK_VID1] = { &rPMGR_VID1_CLK_CFG, 1, { PMGR_CLK_OSC, PMGR_CLK_PLL2, PMGR_CLK_PLL3, PMGR_CLK_PLL5 } },
|
|
[PMGR_CLK_I2C] = { &rPMGR_I2C_CLK_CFG, 1, { PMGR_CLK_PREDIV0, PMGR_CLK_PREDIV1, PMGR_CLK_PREDIV2, PMGR_CLK_OSC } },
|
|
[PMGR_CLK_SDIO] = { &rPMGR_SDIO_CLK_CFG, 1, { PMGR_CLK_PREDIV0, PMGR_CLK_PREDIV1, PMGR_CLK_PREDIV2, PMGR_CLK_PREDIV3 } },
|
|
[PMGR_CLK_AUDIO] = { &rPMGR_AUDIO_CLK_CFG, 1, { PMGR_CLK_PREDIV0, PMGR_CLK_PREDIV1, PMGR_CLK_PREDIV2, PMGR_CLK_PREDIV3 } },
|
|
[PMGR_CLK_HPARK_PCLK] = { &rPMGR_HPARK_PCLK0_CLK_CFG, 1, { PMGR_CLK_PREDIV0, PMGR_CLK_PREDIV1, PMGR_CLK_PREDIV2, PMGR_CLK_PREDIV3 } },
|
|
[PMGR_CLK_HPARK_TCLK] = { &rPMGR_HPARK_TCLK_CLK_CFG, 1, { PMGR_CLK_PREDIV0, PMGR_CLK_PREDIV1, PMGR_CLK_PREDIV2, PMGR_CLK_PREDIV3 } },
|
|
[PMGR_CLK_UPERF] = { &rPMGR_UPERF_CLK_CFG, 1, { PMGR_CLK_PREDIV0, PMGR_CLK_PREDIV1, PMGR_CLK_PREDIV2, PMGR_CLK_PREDIV3 } },
|
|
[PMGR_CLK_DEBUG] = { &rPMGR_DEBUG_CLK_CFG, 1, { PMGR_CLK_PREDIV0, PMGR_CLK_PREDIV1, PMGR_CLK_PREDIV2, PMGR_CLK_OSC } },
|
|
[PMGR_CLK_GFX] = { &rPMGR_GFX_CLK_CFG, 1, { PMGR_CLK_MANAGED0, PMGR_CLK_MANAGED1, PMGR_CLK_MANAGED2, PMGR_CLK_MANAGED4 } },
|
|
[PMGR_CLK_GFX_SLC] = { &rPMGR_GFX_SLC_CLK_CFG, 1, { PMGR_CLK_MANAGED0, PMGR_CLK_MANAGED1, PMGR_CLK_MANAGED2, PMGR_CLK_MANAGED4 } },
|
|
[PMGR_CLK_HPERFNRT] = { &rPMGR_HPERFNRT_CLK_CFG, 1, { PMGR_CLK_MANAGED0, PMGR_CLK_MANAGED1, PMGR_CLK_MANAGED2, PMGR_CLK_MANAGED3 } },
|
|
[PMGR_CLK_HPERFRT] = { &rPMGR_HPERFRT_CLK_CFG, 1, { PMGR_CLK_MANAGED0, PMGR_CLK_MANAGED1, PMGR_CLK_MANAGED2, PMGR_CLK_MANAGED5 } },
|
|
[PMGR_CLK_ISP] = { &rPMGR_ISP_CLK_CFG, 1, { PMGR_CLK_MANAGED0, PMGR_CLK_MANAGED1, PMGR_CLK_MANAGED2, PMGR_CLK_MANAGED3 } },
|
|
[PMGR_CLK_IOP] = { &rPMGR_IOP_CLK_CFG, 1, { PMGR_CLK_MANAGED0, PMGR_CLK_MANAGED1, PMGR_CLK_MANAGED2, PMGR_CLK_MANAGED3 } },
|
|
[PMGR_CLK_CDIO] = { &rPMGR_CDIO_CLK_CFG, 1, { PMGR_CLK_MANAGED0, PMGR_CLK_MANAGED1, PMGR_CLK_MANAGED2, PMGR_CLK_MANAGED3 } },
|
|
[PMGR_CLK_LPERFS] = { &rPMGR_LPERFS_CLK_CFG, 1, { PMGR_CLK_MANAGED0, PMGR_CLK_MANAGED1, PMGR_CLK_MANAGED2, PMGR_CLK_MANAGED3 } },
|
|
[PMGR_CLK_PCLK0] = { &rPMGR_PCLK0_CLK_CFG, 0, { PMGR_CLK_LPERFS, 0, 0, 0 } },
|
|
[PMGR_CLK_PCLK1] = { &rPMGR_PCLK1_CLK_CFG, 1, { PMGR_CLK_OSC, PMGR_CLK_PLL2, PMGR_CLK_PLL3, PMGR_CLK_PLL4 } },
|
|
[PMGR_CLK_PCLK2] = { &rPMGR_PCLK2_CLK_CFG, 0, { PMGR_CLK_LPERFS, 0, 0, 0 } },
|
|
[PMGR_CLK_PCLK3] = { &rPMGR_PCLK3_CLK_CFG, 0, { PMGR_CLK_LPERFS, 0, 0, 0 } },
|
|
[PMGR_CLK_SPI0] = { &rPMGR_SPI0_CLK_CFG, 0, { PMGR_CLK_MEDIUM0, PMGR_CLK_MEDIUM1, 0, PMGR_CLK_OSC } },
|
|
[PMGR_CLK_SPI1] = { &rPMGR_SPI1_CLK_CFG, 0, { PMGR_CLK_MEDIUM0, PMGR_CLK_MEDIUM1, 0, PMGR_CLK_OSC } },
|
|
[PMGR_CLK_SPI2] = { &rPMGR_SPI2_CLK_CFG, 0, { PMGR_CLK_MEDIUM0, PMGR_CLK_MEDIUM1, 0, PMGR_CLK_OSC } },
|
|
[PMGR_CLK_SPI3] = { &rPMGR_SPI3_CLK_CFG, 0, { PMGR_CLK_MEDIUM0, PMGR_CLK_MEDIUM1, 0, PMGR_CLK_OSC } },
|
|
[PMGR_CLK_SPI4] = { &rPMGR_SPI4_CLK_CFG, 0, { PMGR_CLK_MEDIUM0, PMGR_CLK_MEDIUM1, 0, PMGR_CLK_OSC } },
|
|
[PMGR_CLK_SLOW] = { &rPMGR_SLEEP_CLK_CFG, 2, { PMGR_CLK_OSC, 0, 0, 0 } },
|
|
[PMGR_CLK_SLEEP] = { &rPMGR_SLEEP_CLK_CFG, 1, { PMGR_CLK_SLOW, 0, 0, 0 } },
|
|
[PMGR_CLK_USBPHY] = { &rPMGR_USBPHY_CLK_CFG, 0, { PMGR_CLK_PLLUSB, 0, 0, 0 } },
|
|
[PMGR_CLK_USBPHY1] = { &rPMGR_USBPHY1_CLK_CFG, 0, { PMGR_CLK_PLLUSB, 0, 0, 0 } },
|
|
[PMGR_CLK_USBOHCI] = { &rPMGR_USBOHCI_CLK_CFG, 0, { PMGR_CLK_MEDIUM1, PMGR_CLK_DOUBLER, 0, 0 } },
|
|
[PMGR_CLK_USB12] = { &rPMGR_USB12_CLK_CFG, 1, { PMGR_CLK_OSC, 0, 0, 0 } },
|
|
[PMGR_CLK_NCO_REF0] = { &rPMGR_NCO_REF0_CLK_CFG, 1, { PMGR_CLK_PREDIV0, PMGR_CLK_PREDIV1, PMGR_CLK_PREDIV2, PMGR_CLK_PREDIV3 } },
|
|
[PMGR_CLK_NCO_REF1] = { &rPMGR_NCO_REF1_CLK_CFG, 1, { PMGR_CLK_PREDIV0, PMGR_CLK_PREDIV1, PMGR_CLK_PREDIV2, PMGR_CLK_PREDIV4 } },
|
|
[PMGR_CLK_NCO_REF2] = { &rPMGR_NCO_REF2_CLK_CFG, 1, { PMGR_CLK_PREDIV0, PMGR_CLK_PREDIV1, PMGR_CLK_PREDIV2, PMGR_CLK_PREDIV3 } },
|
|
[PMGR_CLK_VENC_MTX] = { &rPMGR_VENC_MTX_CLK_CFG, 1, { PMGR_CLK_OSC, PMGR_CLK_PLL2, PMGR_CLK_PLL3, PMGR_CLK_PLL5 } },
|
|
[PMGR_CLK_VENC] = { &rPMGR_VENC_CLK_CFG, 1, { PMGR_CLK_VENC_MTX, 0, 0, 0 } },
|
|
[PMGR_CLK_SLV_BUS] = { &rPMGR_SLV_BUS_CLK_CFG, 1, { PMGR_CLK_MANAGED0, PMGR_CLK_MANAGED1, PMGR_CLK_MANAGED2, PMGR_CLK_MANAGED4 } },
|
|
};
|
|
|
|
static void init_thermal_sensors(void);
|
|
static void clocks_get_frequencies(void);
|
|
static u_int32_t get_pll(int pll);
|
|
static void set_pll(int pll, u_int32_t p, u_int32_t m, u_int32_t s, u_int32_t v);
|
|
static void clocks_set_gates(u_int64_t *devices, bool enable);
|
|
static void clocks_quiesce_internal(void);
|
|
static void update_perf_state(u_int32_t new_perf_state);
|
|
|
|
void platform_power_init(void)
|
|
{
|
|
// Set Power Gating Parameters for all the power domains
|
|
rPMGR_PWR_GATE_TIME_A(1) = (208 << 16); // CPU0
|
|
rPMGR_PWR_GATE_TIME_B(1) = (32 << 26);
|
|
rPMGR_PWR_GATE_TIME_A(2) = (208 << 16); // CPU1
|
|
rPMGR_PWR_GATE_TIME_B(2) = (32 << 26);
|
|
rPMGR_PWR_GATE_TIME_A(3) = (54 << 16); // SCU
|
|
rPMGR_PWR_GATE_TIME_A(4) = (36 << 16); // L2RAM0
|
|
rPMGR_PWR_GATE_TIME_A(5) = (36 << 16); // L2RAM1
|
|
rPMGR_PWR_GATE_TIME_A(6) = (192 << 16) | (2 << 0); // IOP
|
|
rPMGR_PWR_GATE_TIME_B(6) = (32 << 26) | (2 << 16) | (2 << 8) | (4 << 0);
|
|
rPMGR_PWR_GATE_TIME_A(7) = (568 << 16) | (7 << 0); // GFX
|
|
rPMGR_PWR_GATE_TIME_B(7) = (2 << 16) | (2 << 8) | (4 << 0);
|
|
rPMGR_PWR_GATE_TIME_A(8) = (621 << 16) | (6 << 0); // HPERF-RT
|
|
rPMGR_PWR_GATE_TIME_B(8) = (2 << 16) | (2 << 8) | (9 << 0);
|
|
rPMGR_PWR_GATE_TIME_A(9) = (605 << 16) | (9 << 0); // ISP
|
|
rPMGR_PWR_GATE_TIME_B(9) = (2 << 16) | (2 << 8) | (4 << 0);
|
|
rPMGR_PWR_GATE_TIME_A(10) = (366 << 16) | (4 << 0); // HPERF-NRT
|
|
rPMGR_PWR_GATE_TIME_B(10) = (2 << 16) | (2 << 8) | (4 << 0);
|
|
rPMGR_PWR_GATE_TIME_A(11) = (472 << 16) | (6 << 0); // VDEC
|
|
rPMGR_PWR_GATE_TIME_B(11) = (2 << 16) | (2 << 8) | (4 << 0);
|
|
rPMGR_PWR_GATE_TIME_A(12) = (529 << 16) | (8 << 0); // VENC
|
|
rPMGR_PWR_GATE_TIME_B(12) = (2 << 16) | (2 << 8) | (4 << 0);
|
|
rPMGR_PWR_GATE_TIME_A(13) = (275 << 16) | (4 << 0); // FMI
|
|
rPMGR_PWR_GATE_TIME_B(13) = (2 << 16) | (2 << 8) | (4 << 0);
|
|
rPMGR_PWR_GATE_TIME_A(14) = (149 << 16) | (1 << 0); // HPARK
|
|
rPMGR_PWR_GATE_TIME_B(14) = (2 << 16) | (2 << 8) | (4 << 0);
|
|
|
|
#if APPLICATION_IBOOT
|
|
/* clear CPU1's reset; it will still be powered down */
|
|
clock_reset_device(CLK_CPU1);
|
|
|
|
// Read thermal Fused values and store into thermal registers.
|
|
init_thermal_sensors();
|
|
#endif
|
|
}
|
|
|
|
|
|
extern void aic_spin(u_int32_t usecs);
|
|
|
|
void platform_power_spin(u_int32_t usecs)
|
|
{
|
|
aic_spin(usecs);
|
|
}
|
|
|
|
int clocks_init(void)
|
|
{
|
|
#if APPLICATION_IBOOT && (PRODUCT_IBOOT || PRODUCT_IBEC)
|
|
|
|
u_int32_t cnt;
|
|
|
|
clks[PMGR_CLK_OSC] = OSC_FREQ;
|
|
|
|
for (cnt = 0; cnt < 7; cnt++) plls[cnt] = get_pll(cnt);
|
|
|
|
/* Calculate our initial performance divider based on CPU_DIVISOR */
|
|
perf_div = (rPMGR_CPU_CLK_CFG & rPMGR_CLK_CFG_DIV_MASK) / (clk_divs_active[0] & rPMGR_CLK_CFG_DIV_MASK);
|
|
|
|
/* Match the divider to one of the performance levels */
|
|
if (perf_div == perf_levels[kPerformanceHigh].perf_div) perf_level = kPerformanceHigh;
|
|
else if (perf_div == perf_levels[kPerformanceMedium].perf_div) perf_level = kPerformanceMedium;
|
|
else if (perf_div == perf_levels[kPerformanceLow].perf_div) perf_level = kPerformanceLow;
|
|
|
|
clocks_get_frequencies();
|
|
|
|
#endif /* APPLICATION_IBOOT && (PRODUCT_IBOOT || PRODUCT_IBEC) */
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* clocks_set_default - called by SecureROM, LLB, iBSS main via
|
|
platform_init_setup_clocks, so the current state of the chip is
|
|
either POR, or whatever 'quiesce' did when leaving SecureROM. */
|
|
int clocks_set_default(void)
|
|
{
|
|
u_int32_t cnt, reg, val, cpu_div;
|
|
volatile u_int32_t *clkcfgs = PMGR_FIRST_CLK_CFG;
|
|
|
|
/* Be sure the bypass performance state is set up */
|
|
rPMGR_PERF_STATE_A(kPERF_STATE_BYPASS) = perf_state_bypass[0];
|
|
rPMGR_PERF_STATE_B(kPERF_STATE_BYPASS) = perf_state_bypass[1];
|
|
rPMGR_PERF_STATE_C(kPERF_STATE_BYPASS) = perf_state_bypass[2];
|
|
|
|
#if APPLICATION_SECUREROM
|
|
rPMGR_PERF_STATE_A(kPERF_STATE_SECUREROM) = perf_state_active[0];
|
|
rPMGR_PERF_STATE_B(kPERF_STATE_SECUREROM) = perf_state_active[1];
|
|
rPMGR_PERF_STATE_C(kPERF_STATE_SECUREROM) = perf_state_active[2];
|
|
#endif
|
|
|
|
#if APPLICATION_IBOOT
|
|
for (cnt = 0; cnt < kPERF_STATE_IBOOT_CNT; cnt++) {
|
|
rPMGR_PERF_STATE_A(kPERF_STATE_IBOOT + cnt) = perf_state_active[(cnt*3) + 0];
|
|
rPMGR_PERF_STATE_B(kPERF_STATE_IBOOT + cnt) = perf_state_active[(cnt*3) + 1];
|
|
rPMGR_PERF_STATE_C(kPERF_STATE_IBOOT + cnt) = perf_state_active[(cnt*3) + 2];
|
|
}
|
|
|
|
// Save the PERF_STATE configuration in rPMGR_SCRATCH1
|
|
rPMGR_SCRATCH1 |= PGMR_SET_PERF_STATE_INDEX(PMGR_PERF_STATE_V(0), kPERF_STATE_IBOOT + 0);
|
|
rPMGR_SCRATCH1 |= PGMR_SET_PERF_STATE_INDEX(PMGR_PERF_STATE_V(1), kPERF_STATE_IBOOT + 1);
|
|
rPMGR_SCRATCH1 |= PGMR_SET_PERF_STATE_INDEX(PMGR_PERF_STATE_P, kPERF_STATE_IBOOT + 3);
|
|
rPMGR_SCRATCH1 |= PGMR_SET_PERF_STATE_INDEX(PMGR_PERF_STATE_M(0), kPERF_STATE_IBOOT + 0);
|
|
rPMGR_SCRATCH1 |= PGMR_SET_PERF_STATE_INDEX(PMGR_PERF_STATE_M(1), kPERF_STATE_IBOOT + 1);
|
|
rPMGR_SCRATCH1 |= PGMR_SET_PERF_STATE_INDEX(PMGR_PERF_STATE_M(2), kPERF_STATE_IBOOT + 2);
|
|
rPMGR_SCRATCH1 |= PGMR_SET_PERF_STATE_INDEX(PMGR_PERF_STATE_M(3), kPERF_STATE_IBOOT + 3);
|
|
#endif
|
|
|
|
/* Change all the clocks to something safe */
|
|
clocks_quiesce_internal();
|
|
|
|
#if APPLICATION_IBOOT && !SUPPORT_FPGA
|
|
// We must be running at Vnom or greater at this point. Move to the fast EMA bank
|
|
// so we can update the incorrect reset values in the slow bank. The fast bank is
|
|
// safe as long as we stay above Vmin.
|
|
rPMGR_EMA_CTL_CPU = rPMGR_EMA_CTL_CPU_SEL;
|
|
while (rPMGR_EMA_CTL_CPU & rPMGR_EMA_CTL_CPU_SPIN) ;
|
|
rPMGR_EMA_CTL_SOC = rPMGR_EMA_CTL_SOC_SEL;
|
|
while (rPMGR_EMA_CTL_SOC & rPMGR_EMA_CTL_SOC_SPIN) ;
|
|
|
|
// Fix the busted defaults in bank 0
|
|
rPMGR_SRAM_EMA_B0_Pn_LO(EMA_MCU) = 0x51b4a; /* rdar://problem/7633460 */
|
|
rPMGR_SRAM_EMA_B0_Pn_HI(EMA_DISP) = 0x32176; /* rdar://problem/7709646 */
|
|
#endif /* APPLICATION_IBOOT */
|
|
|
|
clks[PMGR_CLK_OSC] = OSC_FREQ;
|
|
|
|
#ifdef PLL0_T
|
|
set_pll(0, PLL0_P, PLL0_M, PLL0_S, PLL0_V);
|
|
#endif
|
|
|
|
#ifdef PLL1_T
|
|
set_pll(1, PLL1_P, PLL1_M, PLL1_S, PLL1_V);
|
|
#endif
|
|
|
|
#ifdef PLL2_T
|
|
set_pll(2, PLL2_P, PLL2_M, PLL2_S, PLL2_V);
|
|
#endif
|
|
|
|
#ifdef PLL3_T
|
|
set_pll(3, PLL3_P, PLL3_M, PLL3_S, PLL3_V);
|
|
#endif
|
|
|
|
#ifdef PLL4_T
|
|
set_pll(4, PLL4_P, PLL4_M, PLL4_S, PLL4_V);
|
|
#endif
|
|
|
|
#ifdef PLL5_T
|
|
set_pll(5, PLL5_P, PLL5_M, PLL5_S, PLL5_V);
|
|
#endif
|
|
|
|
#ifdef PLLUSB_T
|
|
set_pll(6, PLLUSB_P, PLLUSB_M, PLLUSB_S, PLLUSB_V);
|
|
#endif
|
|
|
|
// Use get_pll() to establish the frequencies (unconfigured PLLs will bypass OSC)
|
|
for (cnt = 0; cnt < 7; cnt++) plls[cnt] = get_pll(cnt);
|
|
|
|
// perf_div needs to be established before touching PMGR_CPU_CLK_CFG
|
|
perf_level = kPerformanceLow;
|
|
perf_div = perf_levels[perf_level].perf_div;
|
|
|
|
// Open the active PLL gates
|
|
rPMGR_PLL_GATES = PLL_GATES_ACTIVE;
|
|
|
|
// Set all clock dividers to their active values
|
|
// Start with CPU then work backwards
|
|
for (cnt = 0; cnt < PMGR_CLK_CFG_COUNT; cnt++) {
|
|
reg = PMGR_CLK_CFG_COUNT - cnt;
|
|
if (reg == PMGR_CLK_CFG_COUNT) reg = 0;
|
|
|
|
// Take care of managed clocks before predivs
|
|
if (reg == PMGR_CLK_NUM(MANAGED0))
|
|
update_perf_state(kPerformanceLow);
|
|
|
|
val = clk_divs_active[reg];
|
|
|
|
// Factor perf_div into PMGR_CPU_CLK_CFG
|
|
if (reg == PMGR_CLK_NUM(CPU)) {
|
|
cpu_div = val & rPMGR_CLK_CFG_DIV_MASK;
|
|
val &= ~rPMGR_CLK_CFG_DIV_MASK;
|
|
val |= cpu_div * perf_div;
|
|
}
|
|
clkcfgs[reg] = val;
|
|
// Sleep clock needs special attention: <rdar://problem/7556576>
|
|
// instead, we just make sure not to disable it.
|
|
|
|
while (clkcfgs[reg] & rPMGR_CLK_CFG_PENDING);
|
|
}
|
|
|
|
clocks_get_frequencies();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void update_perf_state(u_int32_t new_perf_level)
|
|
{
|
|
u_int32_t val, cpu_div;
|
|
|
|
/* Change the CPU speed (factor old perf_div out, multiple new one in) */
|
|
if (perf_levels[new_perf_level].perf_div != perf_div) {
|
|
val = rPMGR_CPU_CLK_CFG;
|
|
cpu_div = val & rPMGR_CLK_CFG_DIV_MASK;
|
|
cpu_div = (cpu_div / perf_div) * perf_levels[new_perf_level].perf_div;
|
|
val = (val & ~rPMGR_CLK_CFG_DIV_MASK) | cpu_div;
|
|
rPMGR_CPU_CLK_CFG = val;
|
|
while (rPMGR_CPU_CLK_CFG & rPMGR_CLK_CFG_PENDING);
|
|
perf_div = perf_levels[new_perf_level].perf_div;
|
|
}
|
|
|
|
/* Write the new select value */
|
|
rPMGR_PERF_STATE_CTL = PMGR_PERF_STATE_SEL(perf_levels[new_perf_level].perf_state);
|
|
|
|
/* Spin while any pending bits are asserted */
|
|
while (rPMGR_PERF_STATE_CTL & PMGR_PERF_STATE_PENDING);
|
|
}
|
|
|
|
void clocks_quiesce(void)
|
|
{
|
|
/* mcu_clk will be changed to bypass clock */
|
|
clks[PMGR_CLK_MCU] = OSC_FREQ;
|
|
|
|
/* Change all the clocks to something safe */
|
|
clocks_quiesce_internal();
|
|
|
|
/* effectively full performance */
|
|
perf_level = kPerformanceHigh;
|
|
perf_div = perf_levels[kPerformanceHigh].perf_div;
|
|
}
|
|
|
|
static void clock_update_range(u_int32_t first, u_int32_t last, u_int32_t clkdata[])
|
|
{
|
|
volatile u_int32_t *clkcfgs = PMGR_FIRST_CLK_CFG;
|
|
u_int32_t val, reg;
|
|
|
|
reg = first;
|
|
while (reg <= last) {
|
|
val = clkdata[reg];
|
|
clkcfgs[reg] = val;
|
|
while (clkcfgs[reg] & rPMGR_CLK_CFG_PENDING);
|
|
reg++;
|
|
}
|
|
}
|
|
|
|
static void clocks_quiesce_internal(void)
|
|
{
|
|
u_int64_t devices[2];
|
|
|
|
// Critical: Debug, AIC, DWI, GPIO, AUDIO, UPERF, CDMA, CDIO,
|
|
// MCU, L2RAM, SCU, CPU0
|
|
devices[0] = 0x000010005800005DULL;
|
|
devices[1] = 0x00000000001D0000ULL;
|
|
|
|
// Turn on critical device clocks
|
|
clocks_set_gates(devices, true);
|
|
|
|
// Turn off non-critical device clocks
|
|
clocks_set_gates(devices, false);
|
|
|
|
// Simplified from PMGR Spec 1.16 Section 3.13.6 (plus changes from Erik)
|
|
|
|
// Reset top-level dividers to bypass
|
|
clock_update_range(PMGR_CLK_NUM(PCLK1), PMGR_CLK_NUM(PREDIV6), clk_divs_bypass);
|
|
clock_update_range(PMGR_CLK_NUM(VID1), PMGR_CLK_NUM(VID1), clk_divs_bypass);
|
|
#if APPLICATION_IBOOT
|
|
// Prepare to move memory to bypass clock (ensure not high frequency, enable DLL force mode)
|
|
rPMGR_PERF_STATE_CTL = PMGR_PERF_STATE_SEL(perf_levels[kPerformanceMedium].perf_state);
|
|
while (rPMGR_PERF_STATE_CTL & PMGR_PERF_STATE_PENDING);
|
|
miu_bypass_prep();
|
|
#endif
|
|
// Reset managed clocks and mcu, venc_mtx
|
|
rPMGR_PERF_STATE_CTL = PMGR_PERF_STATE_SEL(kPERF_STATE_BYPASS);
|
|
while (rPMGR_PERF_STATE_CTL & PMGR_PERF_STATE_PENDING);
|
|
// Reset PLLs and Doubler
|
|
rPMGR_PLL0_CTL = rPMGR_PLL_EXT_BYPASS;
|
|
rPMGR_PLL1_CTL = rPMGR_PLL_EXT_BYPASS;
|
|
rPMGR_PLL2_CTL = rPMGR_PLL_EXT_BYPASS;
|
|
rPMGR_PLL3_CTL = rPMGR_PLL_EXT_BYPASS;
|
|
rPMGR_PLL4_CTL = rPMGR_PLL_EXT_BYPASS;
|
|
rPMGR_PLL5_CTL = rPMGR_PLL_EXT_BYPASS;
|
|
rPMGR_PLLUSB_CTL = rPMGR_PLL_EXT_BYPASS;
|
|
#if !SUPPORT_FPGA
|
|
while (!(rPMGR_PLL0_DEBUG & rPMGR_PLL_DEBUG_BYP_ENABLED)) ;
|
|
while (!(rPMGR_PLL1_DEBUG & rPMGR_PLL_DEBUG_BYP_ENABLED)) ;
|
|
while (!(rPMGR_PLL2_DEBUG & rPMGR_PLL_DEBUG_BYP_ENABLED)) ;
|
|
while (!(rPMGR_PLL3_DEBUG & rPMGR_PLL_DEBUG_BYP_ENABLED)) ;
|
|
while (!(rPMGR_PLL4_DEBUG & rPMGR_PLL_DEBUG_BYP_ENABLED)) ;
|
|
while (!(rPMGR_PLL5_DEBUG & rPMGR_PLL_DEBUG_BYP_ENABLED)) ;
|
|
while (!(rPMGR_PLLUSB_DEBUG & rPMGR_PLL_DEBUG_BYP_ENABLED)) ;
|
|
#endif
|
|
rPMGR_DOUBLER_CTL = rPMGR_PLL_EXT_BYPASS;
|
|
while (!(rPMGR_DOUBLER_DEBUG & rPMGR_PLL_DEBUG_BYP_ENABLED)) ;
|
|
// Open the PLL Gates
|
|
rPMGR_PLL_GATES = (1 << 5) | (1 << 3) | (1 << 2);
|
|
// Reset the lower-level clocks
|
|
clock_update_range(PMGR_CLK_NUM(MANAGED0), PMGR_CLK_NUM(SLV_BUS), clk_divs_bypass);
|
|
// Reset the CPU clocks
|
|
clock_update_range(PMGR_CLK_NUM(CPU), PMGR_CLK_NUM(MCU), clk_divs_bypass);
|
|
}
|
|
|
|
u_int32_t clocks_set_performance(u_int32_t performance_level)
|
|
{
|
|
u_int32_t old_perf_level = perf_level;
|
|
|
|
update_perf_state(performance_level);
|
|
perf_level = performance_level;
|
|
return old_perf_level;
|
|
}
|
|
|
|
void clock_get_frequencies(u_int32_t *clocks, u_int32_t count)
|
|
{
|
|
u_int32_t cnt = PMGR_CLK_COUNT;
|
|
|
|
if (cnt > count) cnt = count;
|
|
|
|
memcpy(clocks, clks, cnt * sizeof(u_int32_t));
|
|
}
|
|
|
|
u_int32_t clock_get_frequency(int clock)
|
|
{
|
|
switch (clock) {
|
|
case CLK_CPU:
|
|
case CLK_FCLK:
|
|
return clks[PMGR_CLK_CPU];
|
|
case CLK_ACLK:
|
|
case CLK_MEM:
|
|
return clks[PMGR_CLK_MCU];
|
|
case CLK_HCLK:
|
|
case CLK_BUS:
|
|
return clks[PMGR_CLK_PIO];
|
|
case CLK_PERIPH:
|
|
case CLK_PCLK:
|
|
return clks[PMGR_CLK_PCLK0];
|
|
case CLK_FMI:
|
|
return clks[PMGR_CLK_PCLK1];
|
|
case CLK_NCLK:
|
|
case CLK_FIXED:
|
|
case CLK_TIMEBASE:
|
|
return clks[PMGR_CLK_OSC];
|
|
case CLK_USBPHYCLK:
|
|
#if SUPPORT_FPGA
|
|
return clks[PMGR_CLK_USBPHY]; /* The reference is special on FPGA */
|
|
#else
|
|
return clks[PMGR_CLK_OSC]; /* This is ref_24_clk, not usb_phy_clk */
|
|
#endif
|
|
case CLK_NCOREF:
|
|
return clks[PMGR_CLK_NCO_REF0];
|
|
case CLK_VCLK0:
|
|
return clks[PMGR_CLK_VID0];
|
|
case CLK_I2C0:
|
|
case CLK_I2C1:
|
|
case CLK_I2C2:
|
|
return clks[PMGR_CLK_I2C];
|
|
case CLK_MCLK:
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
void clock_set_frequency(int clock, u_int32_t divider, u_int32_t pll_p, u_int32_t pll_m, u_int32_t pll_s, u_int32_t pll_t)
|
|
{
|
|
switch (clock) {
|
|
case CLK_VCLK0:
|
|
/* XXX */
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
void clock_gate(int device, bool enable)
|
|
{
|
|
volatile u_int32_t *reg = PMGR_FIRST_PS + device;
|
|
|
|
if (reg > PMGR_LAST_PS) return;
|
|
|
|
// Set the PS field to the requested level
|
|
if (enable) *reg |= 0xF;
|
|
else *reg &= ~0xF;
|
|
|
|
// Wait for the PS and ACTUAL_PS fields to be equal
|
|
while ((*reg & 0xF) != ((*reg >> 4) & 0xF));
|
|
}
|
|
|
|
static void clocks_set_gates(u_int64_t *devices, bool enable)
|
|
{
|
|
u_int32_t dev, index;
|
|
volatile u_int32_t *devpss = PMGR_FIRST_PS;
|
|
u_int64_t mask = 1, devmask = 0;
|
|
|
|
for (dev = 0, index = -1; dev < PMGR_DEV_PS_COUNT; dev++, mask <<= 1) {
|
|
if ((dev % 64) == 0) {
|
|
devmask = devices[++index];
|
|
if (enable == false)
|
|
devmask ^= -1ULL;
|
|
mask = 1;
|
|
}
|
|
// Skip CPUs
|
|
if (dev < PMGR_PS_NUM(SCU)) continue;
|
|
if ((devmask & mask) != 0) {
|
|
if (enable) devpss[dev] |= 0xF;
|
|
else devpss[dev] &= ~0xF;
|
|
|
|
// Wait for the PS and ACTUAL_PS fields to be equal
|
|
while ((devpss[dev] & 0xF) != ((devpss[dev] >> 4) & 0xF));
|
|
}
|
|
}
|
|
}
|
|
|
|
void platform_diag_gate_clocks(void)
|
|
{
|
|
}
|
|
|
|
void platform_system_reset(bool panic)
|
|
{
|
|
#if WITH_BOOT_STAGE
|
|
if (!panic) boot_set_stage(kPowerNVRAMiBootStageOff);
|
|
#endif
|
|
|
|
// Use WDOG pin to cause a PMU reset
|
|
gpio_configure_out(GPIO_SYSTEM_RESET, 1);
|
|
|
|
while (1);
|
|
}
|
|
|
|
void platform_reset(bool panic)
|
|
{
|
|
#if WITH_BOOT_STAGE
|
|
if (!panic) boot_set_stage(kPowerNVRAMiBootStageOff);
|
|
#endif
|
|
|
|
wdt_chip_reset();
|
|
|
|
while (1);
|
|
}
|
|
|
|
void platform_watchdog_tickle(void)
|
|
{
|
|
// Varies by target. This layer between is necessary so that
|
|
// we don't go straight from generic code to target.
|
|
target_watchdog_tickle();
|
|
}
|
|
|
|
static const u_int32_t divider_slot_table[8 * 2] = {
|
|
0x00000000, 0,
|
|
0x0000001F, 0,
|
|
0x000003E0, 5,
|
|
0x00007C00, 10,
|
|
0x000F8000, 15,
|
|
0x00001F00, 8,
|
|
0x001F0000, 16,
|
|
0x1F000000, 24
|
|
};
|
|
|
|
static void clocks_get_frequencies(void)
|
|
{
|
|
#if SUPPORT_FPGA
|
|
u_int32_t cnt;
|
|
u_int32_t freq = OSC_FREQ;
|
|
|
|
for (cnt = 0; cnt < PMGR_CLK_COUNT; cnt++)
|
|
clks[cnt] = freq;
|
|
|
|
clks[PMGR_CLK_CPU] = 15000000;
|
|
clks[PMGR_CLK_MCU] = 10000000;
|
|
clks[PMGR_CLK_MCU_FIXED]= 10000000;
|
|
clks[PMGR_CLK_USBPHY] = 12000000;
|
|
|
|
// keep compiler happy
|
|
cnt = (u_int32_t)clk_parents;
|
|
cnt = (u_int32_t)divider_slot_table;
|
|
|
|
#else
|
|
volatile u_int32_t *reg;
|
|
u_int32_t cnt, val, src_shift, parent_idx, slot, mask, shift, divider, perf_div_tmp;
|
|
u_int64_t freq;
|
|
|
|
for (cnt = 0; cnt < PMGR_CLK_COUNT; cnt++) {
|
|
reg = clk_parents[cnt].divider_reg;
|
|
if (reg == 0) continue;
|
|
|
|
switch (cnt) {
|
|
case PMGR_CLK_MANAGED0 :
|
|
src_shift = 5;
|
|
slot = 1;
|
|
val = (*reg & rPMGR_CLK_CFG_ENABLE) | (perf_state_active[0] & ~rPMGR_CLK_CFG_ENABLE);
|
|
break;
|
|
|
|
case PMGR_CLK_MANAGED1 :
|
|
src_shift = 13;
|
|
slot = 5;
|
|
val = (*reg & rPMGR_CLK_CFG_ENABLE) | (perf_state_active[0] & ~rPMGR_CLK_CFG_ENABLE);
|
|
break;
|
|
|
|
case PMGR_CLK_MANAGED2 :
|
|
src_shift = 21;
|
|
slot = 6;
|
|
val = (*reg & rPMGR_CLK_CFG_ENABLE) | (perf_state_active[0] & ~rPMGR_CLK_CFG_ENABLE);
|
|
break;
|
|
|
|
case PMGR_CLK_MANAGED3 :
|
|
src_shift = 29;
|
|
slot = 7;
|
|
val = (*reg & rPMGR_CLK_CFG_ENABLE) | (perf_state_active[0] & ~rPMGR_CLK_CFG_ENABLE);
|
|
break;
|
|
|
|
case PMGR_CLK_MANAGED4 :
|
|
src_shift = 5;
|
|
slot = 1;
|
|
val = (*reg & rPMGR_CLK_CFG_ENABLE) | (perf_state_active[1] & ~rPMGR_CLK_CFG_ENABLE);
|
|
break;
|
|
|
|
case PMGR_CLK_MANAGED5 :
|
|
src_shift = 13;
|
|
slot = 5;
|
|
val = (*reg & rPMGR_CLK_CFG_ENABLE) | (perf_state_active[2] & ~rPMGR_CLK_CFG_ENABLE);
|
|
break;
|
|
|
|
case PMGR_CLK_AES_CORE :
|
|
src_shift = 21;
|
|
slot = 1;
|
|
val = (*reg & rPMGR_CLK_CFG_ENABLE) | (perf_state_active[2] & ~rPMGR_CLK_CFG_ENABLE);
|
|
break;
|
|
|
|
case PMGR_CLK_MCU :
|
|
src_shift = 32;
|
|
slot = 5;
|
|
val = (*reg & rPMGR_CLK_CFG_ENABLE) | (perf_state_active[1] & ~rPMGR_CLK_CFG_ENABLE);
|
|
break;
|
|
|
|
case PMGR_CLK_MCU_FIXED :
|
|
src_shift = 21;
|
|
slot = 6;
|
|
val = (*reg & rPMGR_CLK_CFG_ENABLE) | (perf_state_active[1] & ~rPMGR_CLK_CFG_ENABLE);
|
|
break;
|
|
|
|
case PMGR_CLK_VENC_MTX :
|
|
src_shift = 5;
|
|
slot = 1;
|
|
val = (*reg & rPMGR_CLK_CFG_ENABLE) | (perf_state_active[2] & ~rPMGR_CLK_CFG_ENABLE);
|
|
break;
|
|
|
|
default :
|
|
src_shift = 28;
|
|
slot = clk_parents[cnt].divider_slot;
|
|
val = *reg;
|
|
break;
|
|
}
|
|
|
|
if ((val & rPMGR_CLK_CFG_ENABLE) == 0) continue;
|
|
|
|
parent_idx = clk_parents[cnt].parents[(val >> src_shift) & 3];
|
|
freq = clks[parent_idx];
|
|
|
|
if ((cnt == PMGR_CLK_DOUBLER) && !(val & rPMGR_DOUBLER_EXT_BYPASS))
|
|
freq *= 2;
|
|
|
|
if (slot != 0) {
|
|
mask = divider_slot_table[slot * 2];
|
|
shift = divider_slot_table[slot * 2 + 1];
|
|
divider = (val & mask) >> shift;
|
|
|
|
if (divider == 0) continue;
|
|
|
|
switch (cnt) {
|
|
case PMGR_CLK_CPU : perf_div_tmp = perf_div; break;
|
|
default : perf_div_tmp = 1; break;
|
|
}
|
|
freq *= perf_div_tmp;
|
|
freq /= divider;
|
|
}
|
|
|
|
clks[cnt] = freq;
|
|
}
|
|
#endif
|
|
}
|
|
|
|
static u_int32_t get_pll(int pll)
|
|
{
|
|
u_int32_t pllctl;
|
|
u_int64_t freq = 0;
|
|
|
|
switch (pll) {
|
|
case 0: pllctl = rPMGR_PLL0_CTL; break;
|
|
case 1: pllctl = rPMGR_PLL1_CTL; break;
|
|
case 2: pllctl = rPMGR_PLL2_CTL; break;
|
|
case 3: pllctl = rPMGR_PLL3_CTL; break;
|
|
case 4: pllctl = rPMGR_PLL4_CTL; break;
|
|
case 5: pllctl = rPMGR_PLLUSB_CTL; break;
|
|
default: goto exit; break;
|
|
}
|
|
|
|
if ((pllctl & rPMGR_PLL_ENABLE) == 0) goto exit;
|
|
|
|
if ((pllctl & (rPMGR_PLL_EXT_BYPASS | rPMGR_PLL_BYPASS))) {
|
|
freq = OSC_FREQ;
|
|
} else {
|
|
freq = OSC_FREQ * 2;
|
|
freq *= (pllctl >> 3) & 0x3FF; // *M
|
|
freq /= (pllctl >> 14) & 0x3F; // /P
|
|
freq /= 1 << ((pllctl >> 0) & 0x07); // /2^S
|
|
}
|
|
|
|
exit:
|
|
return freq;
|
|
}
|
|
|
|
static void set_pll(int pll, u_int32_t p, u_int32_t m, u_int32_t s, u_int32_t vco)
|
|
{
|
|
volatile u_int32_t *pllctl, *pllparam;
|
|
u_int32_t afc;
|
|
|
|
switch (pll) {
|
|
case 0: pllctl = &rPMGR_PLL0_CTL; pllparam = &rPMGR_PLL0_PARAM; break;
|
|
case 1: pllctl = &rPMGR_PLL1_CTL; pllparam = &rPMGR_PLL1_PARAM; break;
|
|
case 2: pllctl = &rPMGR_PLL2_CTL; pllparam = &rPMGR_PLL2_PARAM; break;
|
|
case 3: pllctl = &rPMGR_PLL3_CTL; pllparam = &rPMGR_PLL3_PARAM; break;
|
|
case 4: pllctl = &rPMGR_PLL4_CTL; pllparam = &rPMGR_PLL4_PARAM; break;
|
|
case 5: pllctl = &rPMGR_PLL5_CTL; pllparam = &rPMGR_PLL5_PARAM; break;
|
|
case 6: pllctl = &rPMGR_PLLUSB_CTL; pllparam = &rPMGR_PLLUSB_PARAM; break;
|
|
default: return; break;
|
|
}
|
|
|
|
// Find the AFC setting for the desired VCO frequency
|
|
afc = 13;
|
|
if (vco < 1100000000UL) afc = 5;
|
|
if (vco > 1500000000UL) afc = 28;
|
|
|
|
// Set the default lock time (2400 cycles), and disable AFC and use EXT AFC
|
|
*pllparam = rPMGR_PARAM_EXT_AFC(afc) | rPMGR_PARAM_LOCK_TIME(2400);
|
|
|
|
*pllctl = (rPMGR_PLL_ENABLE | rPMGR_PLL_LOAD |
|
|
rPMGR_PLL_P(p) | rPMGR_PLL_M(m) | rPMGR_PLL_S(s));
|
|
|
|
#if !SUPPORT_FPGA
|
|
while ((*pllctl & rPMGR_PLL_REAL_LOCK) == 0); // wait for pll to lock
|
|
#endif /* ! SUPPORT_FPGA */
|
|
}
|
|
|
|
#endif // !APPLICATION_EMBEDDEDIOP
|
|
|
|
void clock_reset_device(int device)
|
|
{
|
|
volatile u_int32_t *reg = PMGR_FIRST_PS + device;
|
|
|
|
switch (device) {
|
|
case CLK_CPU1 :
|
|
case CLK_FMI0 :
|
|
case CLK_FMI1 :
|
|
case CLK_FMI2 :
|
|
case CLK_FMI3 :
|
|
case CLK_IOP :
|
|
case CLK_SDIO :
|
|
*reg |= rPMGR_PS_RESET;
|
|
spin(1);
|
|
*reg &= ~rPMGR_PS_RESET;
|
|
break;
|
|
|
|
case CLK_MCU:
|
|
// Make sure resets are asserted/deasserted to gfx0, gfx1, hperfrt, hperfnrt
|
|
// <rdar://problem/7269959>
|
|
rPMGR_GFX_SYS_PS |= rPMGR_PS_RESET;
|
|
rPMGR_GFX_CORES_PS |= rPMGR_PS_RESET;
|
|
rPMGR_HPERFNRT_PS |= rPMGR_PS_RESET;
|
|
rPMGR_HPERFRT_PS |= rPMGR_PS_RESET;
|
|
*reg |= rPMGR_PS_RESET;
|
|
spin(1);
|
|
*reg &= ~rPMGR_PS_RESET;
|
|
rPMGR_GFX_SYS_PS &= ~rPMGR_PS_RESET;
|
|
rPMGR_GFX_CORES_PS &= ~rPMGR_PS_RESET;
|
|
rPMGR_HPERFNRT_PS &= ~rPMGR_PS_RESET;
|
|
rPMGR_HPERFRT_PS &= ~rPMGR_PS_RESET;
|
|
break;
|
|
|
|
default :
|
|
break;
|
|
}
|
|
}
|
|
|
|
#if WITH_DEVICETREE
|
|
|
|
void pmgr_update_device_tree(DTNode *pmgr_node)
|
|
{
|
|
u_int32_t propSize, perf_state_config;
|
|
char *propName;
|
|
void *propData;
|
|
|
|
// Get the PERF_STATE configuration generated at hardware init
|
|
perf_state_config = rPMGR_SCRATCH1;
|
|
if (perf_state_config == 0) return;
|
|
|
|
// Fill in the firmware-v-perf-states property
|
|
propName = "firmware-v-perf-states";
|
|
if (FindProperty(pmgr_node, &propName, &propData, &propSize)) {
|
|
if (propSize != (2 * sizeof(u_int32_t))) {
|
|
panic("pmgr property firmware-v-perf-states is the wrong size");
|
|
}
|
|
// Voltage states are in reverse order
|
|
((u_int32_t *)propData)[0] = PGMR_GET_PERF_STATE_INDEX(PMGR_PERF_STATE_V(1), perf_state_config);
|
|
((u_int32_t *)propData)[1] = PGMR_GET_PERF_STATE_INDEX(PMGR_PERF_STATE_V(0), perf_state_config);
|
|
}
|
|
|
|
// Fill in the firmware-p-perf-state property
|
|
propName = "firmware-p-perf-state";
|
|
if (FindProperty(pmgr_node, &propName, &propData, &propSize)) {
|
|
if (propSize != (1 * sizeof(u_int32_t))) {
|
|
panic("pmgr property firmware-p-perf-states is the wrong size");
|
|
}
|
|
// There is only one Frequency Managed / Performance state
|
|
((u_int32_t *)propData)[0] = PGMR_GET_PERF_STATE_INDEX(PMGR_PERF_STATE_P, perf_state_config);
|
|
}
|
|
|
|
// Fill in the firmware-m-perf-states property
|
|
propName = "firmware-m-perf-states";
|
|
if (FindProperty(pmgr_node, &propName, &propData, &propSize)) {
|
|
if (propSize != (4 * sizeof(u_int32_t))) {
|
|
panic("pmgr property firmware-m-perf-states is the wrong size");
|
|
}
|
|
// Memory states are in the same order
|
|
((u_int32_t *)propData)[0] = PGMR_GET_PERF_STATE_INDEX(PMGR_PERF_STATE_M(0), perf_state_config);
|
|
((u_int32_t *)propData)[1] = PGMR_GET_PERF_STATE_INDEX(PMGR_PERF_STATE_M(1), perf_state_config);
|
|
((u_int32_t *)propData)[2] = PGMR_GET_PERF_STATE_INDEX(PMGR_PERF_STATE_M(2), perf_state_config);
|
|
((u_int32_t *)propData)[3] = PGMR_GET_PERF_STATE_INDEX(PMGR_PERF_STATE_M(3), perf_state_config);
|
|
}
|
|
}
|
|
|
|
#endif
|
|
|
|
void init_thermal_sensors(void)
|
|
{
|
|
// Read fused temperature values to calculate slope and offset to be stored
|
|
// into rPMGR_THERMAL_CTL2, which is later used to compute real die temperature value.
|
|
|
|
u_int32_t fusedTempValueAt70 = chipid_get_fused_thermal_70C();
|
|
u_int32_t fusedTempValueAt25 = chipid_get_fused_thermal_25C();
|
|
u_int32_t tempSlope = 0x100;
|
|
|
|
// Grab the 4 bit fuse revision
|
|
u_int32_t fuseRevision = chipid_get_fuse_revision();
|
|
|
|
// Should probably make sure we don't divde by zero.
|
|
if (fusedTempValueAt25 == fusedTempValueAt70) {
|
|
fusedTempValueAt70 = 70;
|
|
fusedTempValueAt25 = 25;
|
|
dprintf(DEBUG_INFO, "Invalid fuse values\n");
|
|
}
|
|
|
|
// 0 means 1 pt calibration fused incorrectly or no calibration. Proto 1 & 2
|
|
// 1 means 1 pt calibration correct, default slope. EVT units.
|
|
// 2+ future release, reserved for 2 pt calibration.
|
|
if (0 == fuseRevision) {
|
|
fusedTempValueAt25 = fusedTempValueAt25 >> 1;
|
|
fusedTempValueAt25 = ((fusedTempValueAt70 & 0x1) << 7) | fusedTempValueAt25;
|
|
} else if (fuseRevision > 1) {
|
|
// 45 = 70 - 25
|
|
tempSlope = (45*256) / (fusedTempValueAt70 - fusedTempValueAt25);
|
|
}
|
|
|
|
|
|
// Set the PWDN mode on to save power.
|
|
rPMGR_THERMAL_CTL0 |= 0x00000004;
|
|
// Configure PWDN time.
|
|
rPMGR_THERMAL_CTL1 |= 0x00005B00;
|
|
|
|
// Calculate the real offset.
|
|
u_int32_t realOffset = 25 - ((tempSlope * fusedTempValueAt25) / (tempSlope==0x100 ? 1:256));
|
|
|
|
// Bits 23 16
|
|
// Temp_OFFSET => [8 bit signed integer]
|
|
rPMGR_THERMAL_CTL2 = (realOffset & 0xFF) << 16;
|
|
|
|
// Bits 9 0
|
|
// TEMP_SLOPE => [2 bit integer| 8 bit decimal]
|
|
rPMGR_THERMAL_CTL2 |= tempSlope & 0x3FF;
|
|
}
|